| 1. | Safe working stress
安全工作应力 |
| 2. | Numerical analysis of surface stress and desquamating for piston ring with chromeplating surface
镀铬活塞环表面层工作应力及剥离的数值分析 |
| 3. | ( 3 ) derive a way to get the point estimations of parameters under normal working condition stress
( 3 )给出了求正常工作应力下参数点估计的方法。 |
| 4. | With these work groundings , the working stress levels for individual component of the folded - wing are evaluated
在此基础上，对折叠翼面机构各构件在弹性动力学运动过程中的工作应力水平给予了分析与评估。 |
| 5. | The resuits show that metallurgical deject is the main reason leading to early formation of fatigue crack under normal working stress
认为，该曲轴材料的冶金缺陷是导致疲劳裂纹在正常工作应力下过早形成的原因。 |
| 6. | The results indicate that the elastic operating stress range of a torsional axis is extended greatly by pre - twist process and the main reason lies on surface residual stress
结果表明，预扭后扭力轴弹性工作应力?围得到极大扩展，其主要原因在于预扭塑变形成的表面残馀应力。 |
| 7. | After having analyzed the common test methods of working stress briefly , the boring - electrical test method is proposed to test the working stress of rc compression member
对工程中常用工作应力测试方法进行了简要分析，提出利用钻孔电测法测试钢筋混凝土受压构件的工作应力。 |
| 8. | Lots of fatigue influencing factors on high strength bolts is analyzed in this paper systematically , including materials , construction processing , fixing and working stress
本文从材料、构造加工、制作安装及工作应力等四个方面系统地分析了高强螺栓的疲劳影响因素及影响程度。 |
| 9. | In the article , the numerical simulation software ansys is used to analyze the working stress distribution in butt joint and the effect of the geometric parameter on the stress concentration efficiency
摘要通过数值模拟软件ansys分析对接接头的工作应力分布，找出了对接接头的几何参数对应力集中系数的影响。 |
| 10. | Based on the analysis and calculation results , it is proven that geomembrane is an ideally impervious material . it has good performances in such aspects as impermeability , elasto - plastic deformation adaptability , resistance ability against erosion
各种分析论证及其计算结果均证明土工膜是一种理想的防渗材料，具有很好的不透水性，很好的弹塑性变形能力，有一定的抗拉能力，能够承受施工应力和工作应力。 |
