English translation for "工作环境温度"

working conditions temperature

Example Sentences:

	1.	Working environment temperature 工作环境温度： 535
	2.	Influence of the temperature in the working environment on workers blood pressure 工作环境温度对工人血压的影响
	3.	Capacitors should not be used at the environmental temperature which exceeding the range of specified operating temperature 电解电容器的工作环境温度不能超过规定的使用温度范围。
	4.	Too high temperature of the operating temperature or chemical gas in the operating ambience will cause hoses cracking 工作环境温度过高或工作空间有化学气体，可能会导致软管龟裂。
	5.	The space camera has a thin skin to the change of the circumstances , especially to the change of temperature 空间相机在轨工作环境温度变化范围很大，相机对环境变化，特别是温度波动的影响比较敏感。
	6.	Work position & condition : vertical install , work temperature : - 25 - 55 , relative humidity 80 % , and no corrosiongases for the gauge 工作位置、环境：仪表垂直安装工作环境温度- 25 - 55 ，相对温度不大于80 % ，并且周围空气中不含有腐蚀仪表的有害气体。
	7.	The working condition of nylon shaft liner is determined by many factors , for example : the different formula , shaping technique , the design of shaft liner , installation method , loading features , running speed , lubricant condition , the working environment of shaft liner temperature , humidity and the influence of impurity , abrasion when working etc . so , when designing shaft liner , it is necessary to take consideration of all conditions 铸型尼轴套的许用工作情况是由很多因素决定的，例如不同配方和成型工艺所制得的材料物理机械性能，轴套的设计装配方法，负载特点，运转速度，润滑情况，轴套的工作环境温度湿度杂质的影响，工作时的摩擦条件，对磨材料的性能等。因此，在设计轴套时，应综合考虑各个方面的因素。
	8.	Firstly , the temperature varies in a large range in the place where the gap sensor works , so this paper analyzes the temperature drift of gap sensor , and finds out that the main reasons which result in temperature drift are the resistance of detecting coil and demodulating circuit parameters . to resolve this problem , a practical design of detecting coil is given , and a compensative measure considering the detecting coil and demodulation circuit is proposed to improve the temperature stability of gap sensor 首先,针对间隙传感器工作环境温度变化较大的情况,本文对间隙传感器温度漂移现象进行了分析,认为检测线圈电阻和检波电路参数变化是造成传感器温漂的主要原因,建立了检测线圈的数学模型,提出了检测线圈和检波电路综合补偿方法,解决了间隙传感器的输出信号温度稳定性的问题。
	9.	The conditions of the making an enzymatic electrode , such as the concentration of glutaraldehyde and enzyme , were discussed . and then , different factors which had effects on working of enzymatic electrodes , for instance , the ph of destination solution and the temperature of the environment , were investigated . the optimum working conditions of enzymatic electrodes were ascertained 讨论了戊二醛浓度、酶含量等酶电极制备条件的选择，之后，还考察了待测溶液ph值、电极工作环境温度对酶电极检测过程的影响，初步确定了酶电极的最佳工作环境，并进行了酶电极稳定性的测试。
	10.	The construction execution of prestressing work has many advantages such as : dry - work , rapidity , no organic adhesion agent , small space to be taken , the high efficiency of strengthening , so this way can be applied in the structures which request to improve bearing capacity largely and take small space after strengthening as well as other structures which will work in long time and in high temperature 预应力加固过程是干作业，施工速度快，不使用有机粘结剂，加固后占用空间小，加固效率高，适用于要求大幅度提高承载力及加固后占用空间小的混凝土结构，也适用于要求施工速度快，加固后使用年限长，工作环境温度高的结构。

Similar Words：

"工作环" English translation, "工作环境" English translation, "工作环境的物质方面" English translation, "工作环境改造学" English translation, "工作环境偏好量表" English translation, "工作会" English translation, "工作会议" English translation, "工作汇编" English translation, "工作混合比" English translation, "工作混合气" English translation