English translation for "常温耐压强度"
|
- cold crushing strength
Related Translations:
常温容器: cold chambercold-chamber 常温凝固: air setcold setting 常温冷却水: ambient temperature cooling water 常温压制: cold compactingcold moulding 常温时效: room temperature ageing
- Example Sentences:
| 1. | Shaped insulating refractory products - determination of cold crushing strength
定形隔热耐火制品常温耐压强度试验方法 | | 2. | Dense shaped refractory products - determination of cold compressive strength part2 : test with packing
致密定形耐火制品常温耐压强度试验方法第2部分：衬垫试验法 | | 3. | Dense , shaped refractory products - determination of cold compressive strength - part 1 : referee test without packing
致密定形耐火制品常温耐压强度试验方法无衬垫仲裁试验 | | 4. | Results show that : ( 1 ) for each particle size of andalusite , variation tendency of the properties of the material is generally the same : the maximum of bulk density , compressive strength and rupture strength appears in the range of 5 % - 10 % content of fiber , these properties of the material remarkably decrease as the fiber content exceed 10 % ; while at the same fiber content , the properties of the material increase with the increase of firing temperature
结果表明： ( 1 )对于不同粒度的原料，性能变化规律大致相同：在同一烧成温度下，体积密度、常温耐压强度、常温抗折强度在5 10之间出现峰值，加入量超过10之后材料的性能明显下降；在相同的纤维含量下，随着烧成温度的提高，试样的各项性能均有所上升。 | | 5. | We tested the ambient temperature compressive strength , the ambient temperature bending strength , volume density and the porosity of the sintered composites . by means of the om , sem , and x - ray , we analyzed the composites micro - structure ; we studied the dispersion methods & the mechanism of damage of the fiber ; we also did research on the reinforced mechanism and the fabrication characteristics of the fcmc
测试烧后试样的常温耐压强度、常温抗折强度、体积密度、气孔率，并借助于光学显微镜、扫描电镜以及x射线衍射图象对复合材料微观结构进行了分析，探讨了复合材料中纤维的分散方法、纤维的损伤机理、纤维增强al _ 2o _ 3复合材料的增强机理和及制备特性。 |
- Similar Words：
- "常温硫化胶浆" English translation, "常温硫化胶料" English translation, "常温硫化修补胶" English translation, "常温滤器" English translation, "常温模造法" English translation, "常温内压" English translation, "常温凝固" English translation, "常温凝固的" English translation, "常温凝固油" English translation, "常温匹染机" English translation
|
|
|
