English translation for "成型模"

bending die
contoured die
forming block
forming die
forming mould
progressive die

Related Translations:

成型端:  forming ends of

冷成型:  cold forming process

气压成型:  air pressure formingblow moldinggas-pressure compactinggas-pressure compaction

成型轮:  forming wheel

挤出成型:  sqeezing

波形成型:  wave shaping

成型铣床:  moulderprofiler

离心成型:  centrifugal forming

成型纤维板:  moldboard

成型嘴:  forming nozzle

Example Sentences:

	1.	Research into material - selecting for the lining of shaping die of funnelled brick 漏斗砖成型模内衬选材研究
	2.	Recommended practice for voltage endurance testing of form wound bars and coils 成型模绕棒和线芯的耐压试验的推荐实施规程
	3.	Nut forming dies 螺帽成型模
	4.	The fracture is brittle fracture , and the reason is that material of forming dies takes place the temper brittleness 引起脆性断裂的原因是成型模产生了回火脆性。
	5.	By programs , diamond circular blade is used to process the surface of irregular shape stones , including straight and curved states , various embossments 可通过自行编制的程序，实现石材表面的数控加工，粗加工无需靠模板，精加工无需成型模轮。
	6.	The results show that the fracture surface is characterized by a combination of most intergranular brittle regions and a few cleavage regions , and there are finer precipitations on grainboundaries 结果表明，成型模裂纹断口形态呈沿晶特征，沿晶面上有细小析出物，为脆性断裂。
	7.	The fracture reasons of forming dies , which cracked during forming process of cranks , were analyzed by means of chemical composition analysis , metallographic examination and fracture analysis in this paper 摘要采用化学成分分析、金相检验和断口分析等方法，对开裂的成型模进行了分析。
	8.	Dlc coatings have wide applications in various tools , moulds , machining tools such as drills , mills , cd moulds , punching moulds , moulds for plastics , glass and magnesium alloys Dlc膜可广泛应用于各类工具、模具和刀具，如钻头、铣刀、光盘模具、冲模、塑料成型模、玻璃成型模和镁合金加工模具等。
	9.	This machine is mostly used for rubber has been comminuted with glue water whipping and middling , and pass foaming shapes up template , through oil press system having it beenpressed homologized demand density reprocessed foam rubber 本机主要用于将已经粉碎的泡绵与胶水搅拌混合，再经过发泡成型模，经油压系统压成相应要求密度的再生泡绵。
	10.	Samples are made first by mixing dry bentonite with sand in different proportions , by weight . the percentages of bentonite in the mixture are 10 % , 15 % and 20 % respectively . and then a little water was added to the mixture ( about 3 % by weight ) and mixed thoroughly until the mixture is uniform 试样的制备：首先将砂和膨润土按不同质量比进行混合，膨润土占混合物的比例分别为10 、 15 、 20 ；然后在混合物中加入少量的水，占混合物的3 ；然后充分混合直到混合物均匀；在成型模中锤击混合物，按5层捶击，制成试样。

Similar Words：

"成型螺纹铣刀" English translation, "成型毛坯" English translation, "成型密封" English translation, "成型密实同心绞捻铝导线的技术规范" English translation, "成型面迹印" English translation, "成型模膛" English translation, "成型模注" English translation, "成型磨削" English translation, "成型木材" English translation, "成型囊" English translation