| 1. | We call this rise in strength "age hardening. "
这种强度的增加我们称为“时效硬化”。 |
| 2. | We call this rise in strength " age hardening .
这种强度的增加我们称为“时效硬化” 。 |
| 3. | Standard specification for age - hardening stainless steel forgings
时效硬化的不锈和耐热钢锻件的标准规范 |
| 4. | Age hardening stainless steel
时效硬化不锈钢 |
| 5. | Standard specification for age - hardening alloy steel forgings for pressure vessel components
压力容器部件用时效硬化合金钢锻件的标准规范 |
| 6. | The effect of re - solution and re - ageing on mechanical properties and microstructure of 7175 aluminum alloy
7055铝合金的时效硬化特性与电导率 |
| 7. | Standard specification for hot - rolled and cold - finished age - hardening stainless steel bars and shapes
热轧和冷精轧时效硬化不锈钢棒和型材的标准规范 |
| 8. | Sealing materials for metallic threaded joints in contact with 1st , 2nd and 3rd family gases and hot water . part 2 : non - hardening jointing compounds
接触第1 2 3族气体及热水的金属螺纹连接用密封材料.第2部分:非时效硬化的密封材料 |
| 9. | Standard specification for pressure vessel plates , low - carbon age - hardening nickel - copper - chromium - molybdenum - columbium and nickel - copper - manganese - molybdenum - columbium alloy steel
压力容器用低碳时效硬化的镍铜铬钼铌和镍铜锰钼铌合金钢板的标准规范 |
| 10. | The age hardening characteristic of as - cast cu20ni20mn and cu20ni35mn alloys and the interface characteristic between the alloy and cast tungsten carbide were studied , and on the basis of this study , composites of cu - ni - mn alloy reinforced with different volume fraction ( 0 - 45vol . % ) and different size ( 42 - 362 m ) of cast tungsten carbide particles were made by vacuum hot - pressing liquid sintering technology . pin on disk two body abrasion tests have been performed with different size of sic abrasive under different loads
本文研究了铸态cu20ni20mn和cu20ni35mn合金的时效硬化特性及其与铸造碳化钨的界面特性，并在此基础上以不同尺寸( 42 362 m )的铸造碳化钨颗粒为增强体，采用真空热压液相烧结技术制备了不同颗粒含量( 0 45vol . )的铸造碳化钨颗粒增强cu - ni - mn合金基复合材料；以不同粒度的sic为磨料，在不同载荷条件下利用销?盘磨损试验机测试了复合材料的二体磨料磨损性能。 |
