English translation for "最大剪力"
|
- maximum shear
Related Translations:
剪: Ⅰ名词1.(剪刀) scissors; shears; clippers2.(姓氏) a surname 短语和例子剪成 jian chengⅡ动词1.(用剪刀等使细的或薄片的东西断开) cut (with scissors); clip; trim; snip; shear 短语和例子剪开 cut open; 剪羊毛 shear a sheep; 剪指甲 trim one
- Example Sentences:
| 1. | Depending upon stiffness and strength requirements , this transfer of bending moments can be achieved by either semi - rigid or rigid beam - column connections . in both case , the intersection between beams and columns ( the beam - column joint ) will be subjected to high shears 本文从节点域的屈服过程,破坏机理入手,采用虚功原理,对节点域屈曲进行了推演,得到了节点域破坏的最大剪力,以及屈服后所能承受的剪力。 | | 2. | C ompared the results of structural period , displacement and internal forces of mode 1 with mode 3 , we can know that the hypo - frame can increase the lateral stiffness of the mega steel - frame structures , decrease lateral - deformation of the structures , especially decrease the maximum inter - storey displacement obviously , and get the internal forces and deformation of the whole structure more uniform . from the analysis results , it can be found that the maximum axial force gets less with hypo - frame than without it , and the maximum shear force and bending moment get more with hypo - frame than without it . thus it can be seen that the mainframe can be an independent structure system by itself , but the cooperation of main and hypo frame should be considered for conducting the entire analysis and design , otherwise the mega structure can be unsafe , in addition , from the comparing analysis , it can be found that the shear force and bending moment of inside - row columns are increased much more than those of outside - row ones in a mega column 通过3个算例方案1和方案3结构周期、位移和内力反应的比较分析可知,次框架可以进一步增加巨型钢框架结构的抗侧刚度,减少结构侧向变形,特别是明显减少了结构最大层间位移,使整个结构的内力与变形分布更为均匀;次框架的加入使主框架柱最大轴力较无次框架情况减少,而主框架柱的最大剪力和弯矩较无次框架情况都有所增加,由此可知,虽然主框架本身可以成为独立的结构体系,但在分析设计时,还应该考虑主、次框架协同工作,进行整体分析、整体设计,否则结构会偏于不安全。 |
- Similar Words:
- "最大间距平面" English translation, "最大间隙" English translation, "最大肩宽" English translation, "最大检测限度" English translation, "最大简约法" English translation, "最大剪力理论" English translation, "最大剪切力" English translation, "最大剪切面" English translation, "最大剪切能理论" English translation, "最大剪切应变锥" English translation
|
|
|