| 1. | Integral steel pipe flanges with tongue and groove face
榫槽面整体钢制管法兰 |
| 2. | Steel pipe blank flanges with tongue and groove face
榫槽面钢制管法兰盖 |
| 3. | The parts and units of jigs and fixtures . groove face clamp plate
机床夹具零件及部件.槽面压块 |
| 4. | Hubbed slip - on - welding steel pipe flanges with tongue and groove face
榫槽面带颈平焊钢制管法兰 |
| 5. | Hubbed socket welding steel pipe flanges with tongue and groove face
榫槽面带颈承插焊钢制管法兰 |
| 6. | Loose plate steel pipe flanges with weld - on collar with tongue and groove face
榫槽面平焊环板式松套钢制管法兰 |
| 7. | Boasted joint surface
宽凿接缝槽面 |
| 8. | Solid softwood panelling and cladding - softwood machined profiles with tongue and groove
固体软木镶板和贴面层.带榫槽面的已加工的软木表面 |
| 9. | The results of flume experiment indicated that , the flow velocity and froude number of the overland flow would fall with the rainfall splash intensity rose ; the flow depth and resistance coefficient would enhance with the rainfall splash intensity increased
水槽试验结果表明：水槽槽面薄层水流流速及弗汝德数随雨滴打击强度的增加而降低，水深、阻力系数随雨滴打击强度的增加而增加。 |
| 10. | Farther , applying the simulating method of the experimental plate validated by experiment , according to the processing of underside machining , top surface machining , and different machining sequences of the different trough on the scale component , the different machining processes of the scale component are simulated , its different distortion values caused by residual stress are get
研究了隔框比例件在不同材料去除过程中由残余应力释放引起的变形问题。对底面加工、槽面加工时残余应力释放引起的变形进行数值模拟，得到了残余应力对隔框构件加工变形影响最小的材料去除方式。 |
