| 1. | The portion of the carburetor air horn that reduces pressure to cause fuel to flow is called the venturi .
减少引起燃油流动压力的化油器空气喇叭口部分称为喉管。 |
| 2. | Bottom hole flowing pressure
井底流动压力 |
| 3. | Bufurcation and chaos in a parallel plate - type structure under flowing pressure
流动压力作用下板状叠层结构的分岔与混沌 |
| 4. | Testing of lubricants ; determination of flow pressure of lubricating greases , kesternich method
润滑剂试验.润滑脂流动压力的测定.耐蚀试验ester |
| 5. | The clearest signs of continuing liquidity stresses have been in the money markets , where banks lend to each other
持续流动压力已经在银行间互相拆借的货币市场发出了再清晰不过的信号。 |
| 6. | Standard test method for time - to - failure of plastic piping systems and components under constant internal pressure with flow
在恒定内流动压力下塑料管道系统和组件损坏时间的标准试验方法 |
| 7. | For the variables with greater gradient , a high - precision interpolating function , such as quasi - consistence hexahedral element method , is naturally necessary to be adopt
开边界给定方式宜采用速度dirichlet条件和流动压力neumann条件，以利用压力无反射条件，加快计算收敛速度。 |
| 8. | The selection of pipe wall thickness , the calculation and design key points of the melt flow , melt pipe flow pressure fall and melt flow speed in the design of melt pipes were introduced in detail
摘要介绍了熔体管道设计中管道壁厚选择、熔体流量、熔体管道流动压力降和熔体流速等计算方法和设计要点。 |
| 9. | Abstract : based on the analysis of the pressure equation of filling flow in injection molding , finite - element method is employed to solve the transient pressure field with moving free form boundary
文摘:在分析注塑充填流动压力方程的基础上，采用有限元方法求解充填过程中非定常、具有移动边界的压力场。 |
| 10. | During deliverability test , flow rate changes from small to big and we can obtain a series of flow pressures , including pressures above saturation pressure and below it , moreover , various physical characters can be obtained by experiments
进行产能测试时，流量从小到大取得一系列稳定的流动压力值，有大于和小于饱和压力的测点。 |
