English translation for "浸入式水口"
|
- immersed nozzle
submerged nozzle
submerged tube
Related Translations:
间断浸入: intermittent immersion 浸入皮下组织: permeate the subcutaneous tissue 浸入电镀: dip platingdiplantingimmersion plating 浸入影响: effect of immersion 浸入法: dipping methodimmersed methodimmersion 浸入管: immersion pipeimmersion tube
- Example Sentences:
| 1. | Numerical simulation of submerged nozzle for thin - slab continuous casting
薄板坯连铸浸入式水口结构数值模拟 | | 2. | Discussion on clog of immersed nozzle in stainless steel 304 slab continuous casting
不锈钢304板坯连铸浸入式水口堵塞问题探讨 | | 3. | Mathematical model study on parameters of submerged nozzle in slab mould at high casting speed
高拉速下板坯浸入式水口参数的数模研究 | | 4. | Experimental study of structure optimization of submerged entry nozzle used for continuous casting of slab
板坯连铸浸入式水口结构优化试验研究 | | 5. | Simulation orthogonal test on process parameters of submerged nozzle in concasting mold for slab
板坯连铸结晶器浸入式水口工艺参数的模拟正交试验 | | 6. | Numerical simulation to the influences of inner cooling apparatus on molten steel flow in billet mould
板坯连铸浸入式水口出口速度对结晶器流场影响的数值模拟 | | 7. | Aiming at the medium thickness slab caster in anshan isco , numerical simulations concerning fluid flow and free surface wave process of liquid steel in mold were conducted by using the cfx4 . 4 , a commercial software package for fluid flow analysis , in which the metallurgical functions of a submerged nozzle , specially the submerged nozzle with three holes , were investigated emphatically
摘要以鞍钢中薄板坯连铸机为对象，在商业软件cfx4 . 4的平台上对结晶器内钢水流动和液面波动过程进行了数值模拟，重点研究了其所独有的3孔浸入式水口的冶金功能。 | | 8. | Detailed predictions on the fluid flow in mold and in cavity of nozzle working end were obtained at different side - hole angle and submerged depth of nozzles , and then the flux variation of liquid steel passing through central hole of the three - hole nozzle and the fluctuation of liquid steel in mold were inspected based on above predictions
针对3孔浸入式水口不同侧孔倾角和浸入深度，数值模拟对结晶器内钢水流动做出了较为详细的预报，研究工作就此分别考察了水口中心孔流量变化和钢水液面波动幅度。 | | 9. | The control system of mould level is crucial to improve the slab quality in the continuous casting process , pid controller is used in the traditional mould level control , and it has some defaults , such as : at the start - up or finishing period of casting or during the changeover of tundish , pid control has a bad effect , its overshoot is large and its transient time is long ; the erosion of the tundish stopper and the submersed nozzles lead to the accuracy of control become bad ; the abrupt falloff of block in the submersed nozzles makes the level acutely fluctuate , and pid control can not overcome the disturbances resulted from the change of casting speed
结晶器液位控制系统是提高连铸产品质量的关键环节，传统的连铸机液位控制方法采用常规的pid控制，存在如下不足：开始、结束浇注和换中间罐浇注时，控制效果差，超调量大，过渡时间长；塞棒头和浸入式水口被腐蚀后引起控制精度差；浸入式水口堵塞物的突然脱落所引起的液位剧烈波动；无法克服拉速波动引起的扰动。 |
- Similar Words：
- "浸入式热电偶高温计" English translation, "浸入式润滑" English translation, "浸入式烧嘴" English translation, "浸入式烧嘴加热炉" English translation, "浸入式石墨电阻加热器" English translation, "浸入式碳-碳化硅热电高温计" English translation, "浸入式探测器" English translation, "浸入式云母电容器" English translation, "浸入式增压器" English translation, "浸入式折射计" English translation
|
|
|
