| 1. | Experimental study on liquid phase in saturator with phase doppler analyzer
利用相位多普勒分析仪对饱和器冷态液相的实验研究 |
| 2. | A charged mosaic membrane consists of a set of anion and cation exchange elements arranged in parallel , each element providing a continuous pathway from one bathing solution to the other
荷电镶嵌膜系由一系列规则排列的阴离子和阳离子交换基团所组成，每一基团为其反离子提供从原料液相到渗透液相的连续通道。 |
| 3. | Abstract : based on the establishment of physical model , this paper used a two - dimensional calculation model to numerically calculate and analyzed the heat transfer process of the two - phase flow within the conduit of single evaporator in cpl
文摘:在建立物理模型和分析管内流动状态并列出基本流动方程的基础上，采用一个二维计算模型进行数值计算，求得管内汽-液相的速度和压力分布。 |
| 4. | The approximate analytical solution of melting process within a spherical enclosure is to presented by contacting heat transfer . a numerical model describing the melting process is presented by considering the difference of the solid - liquid density and natural convection
在所建立的模型中考虑了固相与液相的密度差和自然对流的影响，得出了各个时刻液膜厚度的分布、融化速率和传熟量等计算结果。 |
| 5. | It is concluded that optimum calcined temperature is 900 with x < 0 . 06 and 950 with x 0 . 06 . liquid phase is indispensable in the sinter procession . it contributes to the growth of the crystalline grain and the density
研究表明：当x 0 . 06时，适宜的预合成温度应为900 ，当x 0 . 06时，适宜的预合成温度应为950 ；样品的烧结必须有液相的存在，适量的液相有助于晶粒的生长和材料的致密化，但液相过多将降低压电性能。 |
| 6. | Within the framework of two - phase flow theory , an analysis is carried out based on the momentum and continuity equations of fluid mechanics . corresponding to the physical process of the interaction of the solid and fluid phase , a perturbation analysis is systematically developed
还引用了两相流理论中从低浓度两相流中固相和液相的相互作用着眼,引入摄动分析的理论,并通过动量方程直接得出了悬移质泥沙浓度分布规律的方法。 |
| 7. | ( 2 ) a statistical damage constitutive model is used to explore the feature that the stress - strain curve of damage rock curls upward when the loaded stress is little . and the mixture method is used to realize the coupling of rock without damage , damage and fluid
( 2 )探讨了用损伤统计本构模型模拟应力应变曲线第一阶段稍向上弯曲特征建模问题，采用混合物理论探讨了非损伤岩石、损伤和液相的耦合问题和模拟应力应变曲线第一阶段稍向上弯曲特征建模问题。 |
| 8. | Sintering speed increased greatly with the help of great quantity of heat of the molten iron , the great quantity of heat sent out from the carbonizing reaction and a little quantity of liquid , this sintering type is an instantaneous sintering , the sintering compacting can carry completely in a few minutes , the degree of sintering compacting is very high . ( 6 ) the vc - fe surface composite has high rigidity , it ' s rigidity exceeds 60hrc , under condition of dry sliding friction and overloading
铸造烧结时，过热铁水的巨大热流密度冲击、粉料压坯中的碳化反应的放热以及压坯中少量液相的产生使压坯的烧结速度大大提高，此时属瞬间液相烧结，在十几分钟内烧结过程即可完成，可达到很高的致密化程度。 ( 6 )铸态下vc一fe表面复合材料具有很高的硬度，其铸态硬度) 60hrc 。 |
| 9. | In the model the film thickness in the passage was obtained at first using two phase flow theory ; then , similar analysis solution of concentration distribution of the pollutant in liquid phase and biofilm was obtained through mass component equation of pollutant in gas - liquid phases combined with the biochemical kinetic equation of mass transfer in biofilm and dismission of oxygen limited ; at last , the distribution of pollutant along the filter height and the waste gas purification efficiency were obtained
该模型首先运用两相流理论获得了通道内液膜厚度，然后通过污染物在气相、液相的质量组分方程，结合生物膜内的传质与不?虑氧限制的生化反应动力学方程，获得了污染物在液相和生物膜中浓度分布的近似分析解，最终得到污染物在气相中沿塔高的浓度分布及废气净化效率。 |
| 10. | To solve the mathematic equations , the method based on condensation degree was used . the distributions of temperature , concentration and mass flux on the film surface ; of temperature and concentration in the vapor ; of heat transfer coefficient in the vapor and in the liquid were obtained by applying the model in the flow field
采用冷凝度的方法对该数学模型进行求解，得出了汽相的浓度分布和温度分布，界面处浓度分布、温度分布和传质速率分布，以及汽相和液相的传热系数分布。 |
