| 1. | This reduced temperature dependence permits a simplified drive circuit and reduces the need for temperature stabilization .
与温度的关系变得不密切，也就使驱动电路简化并减少对温度稳定的要求。 |
| 2. | The entire surface of the heating element is stable to < 0 . 1c
加热元件整个表面的温度稳定在< 0 . 1c |
| 3. | Analysis on the phase charcteristics and temperature stability of double tuned circuits
双调谐电路的相位特性及其温度稳定分析 |
| 4. | The exactment and stability of current and temperature for the instrument is achieved the aim and meet the design requirement
驱动电流精度和温度稳定度都达到了预定的目标,满足了设计要求。 |
| 5. | The temperature consistent technology reducing the heat effects the performance characteristics of electrical components
独特的温度稳定技术为所有关键部件创造出稳定适宜的环境温度，使功率损失降到最低。 |
| 6. | Highly recommended for mass production . guaranteed superior quality with accurate pressure , temperature , and time control
适用于大批量产品的生产。具有压力均衡、温度稳定、时间控制精确、加热板升降速度可随意调节等特点。 |
| 7. | The main purpose of this thesis is to improve the 3mm vcos frequency stability that work in harmonic to obtain the more strict demands of new electronic equipments
本文主要任务是改善原有3mm压控谐波振荡器的频率温度稳定度，使其满足系统对3mm振荡源越来越高的要求。 |
| 8. | The dma 38 requires very little sample and performs a measurement quickly and accurate to 3 - digits . a built - in solid state thermostat automatically ensures stable measuring temperatures between 15 and 40 c
Dma 38要求极少的样品量，测量快速且精确度可达3位数。内置一个固态自动调温计以确保测量温度稳定在15 - 40 c |
| 9. | All above six parameters are varied and the results show that the temperature rises to a certain value , which varies with the above factors , however , the time history to obtain the stable value is not affected so much
胎面摩擦温度稳定值的大小因上述参数的变化而变化，但获得稳定值的时间历程受参数变化的影响很小。 |
| 10. | The analysis indicates that temperature change can fall into three successive phases ( temperature rising fast , temperature stabilization and temperature rising slowly ) ; internal pressure is composed of vapor pressure and air pressure
分析表明：板坯内部的温度变化分为3个阶段，即快速升温阶段、温度稳定阶段和后期的慢速升温阶段；内部气压由水蒸气分压和空气分压组成。 |
