| 1. | Newton law for heat loss
牛顿热耗定律 |
| 2. | Infiltration heat loss
渗入热耗 |
| 3. | Unit heat consumption
单位热耗 |
| 4. | It analyses theoretically the reasons why the 100mw generating units are always have a low efficiency and high consumption
并且从理论上分析了100mw机组普遍存在效率低、热耗高的原因。 |
| 5. | The methods for the calculation of the efficiency , unit heat consumption and unit coal consumption of tunnel dryer annular kiln system
隧道式干燥室? ?轮窑体系热效率单位热耗单位煤耗计算方法 |
| 6. | By using mathematical model and computer simulation , the results are obtained from simulating the quantitative influence of 9 important factors on the heat consumption of ceramic fuel fired tunnel kilns
利用陶瓷燃料隧道窑热耗数学模型及计算机模拟方法，得出了9种重要因素对热耗定量影响的模拟结果，并对模拟结果进行了分析。 |
| 7. | Abstract : by using mathematical model and computer simulation , the results are obtained from simulating the quantitative influence of 9 important factors on the heat consumption of ceramic fuel fired tunnel kilns
文摘:利用陶瓷燃料隧道窑热耗数学模型及计算机模拟方法，得出了9种重要因素对热耗定量影响的模拟结果，并对模拟结果进行了分析。 |
| 8. | After having been finished the installation of the unit , the ningxia zhongning power ltd . company must concern about the thermodynamic performance , the character of energy consumption and the effectiveness of the unit
该机购置安装完成后,在宁夏中宁发电有限公司运行状况如何,其热耗特性,机组的效率是多少,是运行单位和设备厂家共同关心的问题。 |
| 9. | Refractory fiber and product is manufactured by means of dry method and wet method . as an excellent insulation material , it has comparatively low volume density , good softness and very low thermal conductivity coefficient . sticking method , ancjoring method and folding method can be selected respectively . this product can be used in various industrial kilns & furmaces for lowering heat consumption
耐火纤维及制品是采用干法、湿法生产的具有较低体积密度、较好柔软性、极低的导热系数的优质绝热保温材料，施工时可分别采用粘贴法、锚固法、折叠块形式施工，适用于各种工业窑炉降低热耗之用。 |
| 10. | And a series of measures to increase productivity and energy saving were put forward , including reduction of solid fuel consumption , power consumption , ignition heat consumption , waste heat utilization and improvement in automation control etc which can be considered for sintering unit no . 2 to save energy and reduce consumption in the future
从降低固体燃料消耗、电耗、点火热耗，馀热回收和提高烧结过程自动化水平等方面提出了增产节能措施，为其进一步节能降耗提供了思路和对策。 |
