| 1. | Oled and moled are made with heat evaporation
论文叙述了用热蒸发的方法制作oled及moled的过程。 |
| 2. | Studies of aggregation of copper phthalocyanine nanoparticles
酞菁铜薄膜的真空热蒸发制备及其性能 |
| 3. | Growth and characterization of undoped polycrystalline zno films
热蒸发分解法制备多晶氧化锌薄膜以及性能分析 |
| 4. | This film formation process is generally more economical than the thermal evaporation method discussed above
这种做膜的方式通常比前述的热蒸发法来得经济。 |
| 5. | At 700 , zno nanostructures with tetrapod - like and wire - like morphologies were synthesized using thermal evaporation method
摘要700下，利用热蒸发方法制得四角状和线状氧化锌纳米结构。 |
| 6. | An array of non - aligned monocrystalline zinc oxide nanowires zno nws is fabricated on a silicon substrate by thermal evaporation
使用热蒸发的方法在硅基底上制备了非定向氧化锌zno单晶纳米线阵列。 |
| 7. | The results indicate that the optical performance and coating quality have been improved drastically by using ion - assisted deposition technology in the vacuum deposition , in comparison with the traditional thermal vapor deposition
结果表明，与传统的热蒸发镀膜工艺相比，在真空沉积过程牛采用离子束辅助沉积技术，可以大大提高膜层的光学特性及膜层品质。 |
| 8. | 3 . polycrystalline lif thin films were grown by thermal evaporation on amorphous substrates . properties of broad band photo - luminescence at room temperature of active channel ( f2 and fa + ) produced by electron beam irradiation were studied
首次用热蒸发法在玻璃衬底上制备了多晶lif薄膜平面波导，研究了由电子束照射产生的有源( f _ 2和f _ 3 ~ +色心)沟道的室温宽带光致发光特性。 |
| 9. | For the first time , we reported the barrier height of au / algan is 1 . 08ev by analysis on various i - v curves under corresponding temperatures . 3 ^ we reported oriented polycrystalline gan on silica substrates using a new method named ga nitridation
3 、采用金属镓层氮化技术，利用我们自行改造的热蒸发设备和氨气氮化设备，在无定形石英衬底上生长出具有择优取向的多晶gan ，取得了一些阶段性的成果。 |
| 10. | In this dissertation , high quality ( 002 ) textured zno films were prepared on silicon substrate using electron beam evaporation method . in addition , zno nano - particle material embedded into mgo thin films was prepared by a co - evaporation ( thermal and electron beam evaporation , simultaneously ) method and a following post - annealing process in oxygen ambient
本文介绍了采用电子束蒸发方法在si衬底表面上制备出了具有c轴择优取向的高质量氧化锌薄膜材料，另外，还采用共蒸发(通过电子束蒸发与热蒸发同时进行)及后退火的简单方法制备出包埋到介电物质mgo薄膜中的zno量子点材料。 |
