English translation for "焊缝成形"
|
- appearance of weld
formation of weld
Related Translations:
焊缝裂开: bond openwelded seam burshwelded seam burstweldedseamburshweldedseamburst 封闭焊缝: closure weldseal weld 焊缝间距: pitch of weldpitchofweldweld spacing
- Example Sentences:
| 1. | Study on shaping mechanism of weld for tig - mig double - sided symmetrical arc welding
双面对称焊焊缝成形机理研究 | | 2. | Form factor of weld
焊缝成形系数 | | 3. | Effect of single constituent fluoride flux on argon arc welding seam forming of ti alloy
单组分氟化物焊剂对钛合金氩弧焊焊缝成形的影响 | | 4. | Study on the physical characteristic of argon - helium arc and its effects on the weld shaping
二氧化碳混合气体电弧行为及其对焊缝成形的影响 | | 5. | Weld appearances and mechanical properties of friction stir welded joint of al alloy and mild steel
铝合金与钢的搅拌摩擦焊焊缝成形及接头性能 | | 6. | Self adjust function of electric arc , easy arc igniton , less spatters , perfect weld appearance
电弧自调节能力强，引弧成功率高，焊接飞溅小，熔敷率高，焊缝成形美观。 | | 7. | Minimal the tendency of microcracks can be obtained by improving the shape of weld pool and enhancing the welding energy input
通过改善焊缝成形和提高焊接线能量有助于减小两类热影响区微裂纹倾向。 | | 8. | The arc physical characteristic of mixed gases ( ar + he + co2 ) and its effects on weld shaping were discussed
摘要采用钨极氩弧焊对不同比例氩氦二氧化碳混合气体的电弧物理特性及其焊缝成形进行了实验。 | | 9. | Specially for welding of thin and mid - thickness steel ; suitable for mag co2 welding of low carbon steel and low alloy steel inner wire feeder structure ; zx5 series thyristor dc arc welder ac arc welder with single phase moveable coil for sma mma welding ; suitable for welding low carbon steel , low alloy steel ; suitable for welding mid - thickness steel
可用于所有牌号焊条的直接手工电弧焊接引弧容易，无须用户调节可远距离调节焊接电流，便于焊工操作焊机动特性好，性能柔和，电弧稳定焊接熔池平静，飞溅小，不咬边，焊缝成形美观。 | | 10. | The variable polarity power supply circuit uses two stages full - bridge inverter , the former inverter is regarded as a constant - current source with fast dynamic response , and supplys energy for the second one , and the latter one is to produce variable polarity current excellently , and low - frequency pulse current by variable polarity power supply is used to reduce input energy and control the shape of weld bead while welding . a series of high - frequency pulse current is superposed on direct - current - electrode - negative ( dcen ) current through the high - frequency pulse power supply , which is used to compress the arc and improve process of crystallization
其中变极性电源采用二次全桥逆变结构,一次逆变提供快速的响应速率并给二次逆变提供能量,二次逆变提供良好的变极性性能,使输出能量最优化,并用其低频电流特性减小电弧线能量,控制焊缝成形;高频脉冲电源提供的高频电流叠加在反极性电流dcen上,利用电流的高频特性压缩电弧,改善焊缝金属结晶过程。 |
- Similar Words：
- "焊缝长度" English translation, "焊缝超宽" English translation, "焊缝超声波探伤标准" English translation, "焊缝沉积区" English translation, "焊缝衬垫" English translation, "焊缝成形的影响研究发现" English translation, "焊缝成形系数" English translation, "焊缝尺寸" English translation, "焊缝尺寸不对" English translation, "焊缝尺寸不也不错" English translation
|
|
|
