English translation for "熔体温度"
|
- injection molding-melt temperature
Related Translations:
虚脱体温: collapse body temperature 体温测定: measurement of body temperature 体温过低: hypotermiahypothermiahypothermy 平均体温: mean body temperaturemean temperature 腋下体温: axillary temperatureaxillaty temperature 体温传感器: body temperature transducer 体温中枢: heat centersheat centre 试体温: to take one's temperature 高体温: high feverhyperpyrexia
- Example Sentences:
| 1. | Large extrusion output , low and equal melt temperature
挤出量大，熔体温度低，熔体温度均匀。 | | 2. | A study of melt thermal treatment imposed on hypoeutectic al - si alloy
合金熔体温度处理工艺参数研究 | | 3. | Expendable thermocouples for the molten metal temperature fast measurement
消耗式快速测量金属熔体温度用热电偶 | | 4. | Process window analysis , another part of mold flow analysis , examines melt temperature , mold temperature , injection pressure , and fill times
加工窗口分析、其它零件的模流分析，检查熔体温度、模具温度、注塑压力和充填时间。 | | 5. | The interface motion situation of gas - melt is changed when injecting gas into melt in various conditions - gas - entering pressure 、 melt temperature and so on
摘要气体经喷嘴进入聚合物熔体时所形成的气熔界面的运动情况随着进气压力、熔体温度等不同参数的改变而发生变化。 | | 6. | Based on the numeric analysis of the model , the effects of melt temperature , injection time , mold temperature and pre - filled volume on the cell size were studied especially
在对该数学模型进行数值分析的基础上，着重研究了熔体温度、注塑时间、模具温度、初始填充量对微泡尺寸的影响。 | | 7. | Other " tricks " used by operators to tell melt temperature include observing the smoke / vapors that come off the emerging melt , or the degree of sticking to cooling rolls or devices
操作人员还用其它一些诀窍还显示熔体温度，包括观察熔体挤出时的烟雾和挥发，或者熔体粘辊或者设备的程度。 | | 8. | Papers also points out that the size of the adscititious powder agglomerate enwrapped by pure al melt , the effect and intensity of stirring shear force and the melt temperature at the beginning of reaction between the adscititious powder and al melt are the main factors affecting the in - situ reaction ongoing velocity
并指出了影响反应进行速度的主要因素是熔体中分散包裹的加入粉末团的尺寸大小、有无搅拌剪切力作用、反应进行时的熔体温度。其中，粉末团尺寸大小与彻底完成反应所需时间的关系最大，大尺寸粉末团将大大延长反应时间。 | | 9. | Cd1 - xznxte single crystal with good crystallinity has been grown by the descending ampoule with rotation method - before this , high - purity cd1 - xznxte polycrystal materials have been synthesized from 6n gd zn te in the same ampoule . on the basis of this , we deeply explore method of detector fabrication . and we also studied the level and density of traps in detector . gold , indium and c have been deposited as electrodes on polished and chemically etched surfaces of samples with the sizes from 5 5 1 to 10 10 1 . 5mm to compare different contact technologies . the behavior of detector ' s leakage current with temperature and leakage current with time were studied as well as th current - voltage characteristics to deduce the level and density of trap in detectors
我们利用熔体温度振荡法在石英安瓿中将6n的单质cd 、 zn 、 te合成多晶原料，用坩锅旋转下降法在同一安瓿中生长出尺寸为20 40mm的cd _ ( 1 - x ) zn _ xte晶体。在此基础上对碲锌镉探测器的工艺进行了较深入的研究，制作了厚1 ? 1 . 5mm的探测器，测试了c 、 in 、 au等不同金属的电极接触性能，并在国内首次通过测试器件的i ? v 、 i ? t曲线、弛豫特性和电容特性对电阻率、陷阱能级、陷阱浓度进行了分析，同时测得的~ ( 241 ) am源的能谱。 |
- Similar Words：
- "熔体输出量" English translation, "熔体潭" English translation, "熔体体积" English translation, "熔体通道" English translation, "熔体突然膨胀" English translation, "熔体形变历程" English translation, "熔体形成" English translation, "熔体运动" English translation, "熔体增白剂" English translation, "熔体粘度" English translation
|
|
|
