| 1. | Testing of paper and board - determination of the ring crush resistance
纸和纸板的试验.环向压缩阻力的测定 |
| 2. | Wave propagation characteristics of cylindrical shells with circumferential surface crack
含环向表面裂纹圆柱壳的波传播特性研究 |
| 3. | Symplectic solutions of annular sector plate clamped along two circular edges with circumfluent coordinate treated as
环扇形板弯曲问题中环向模拟为时间的辛体系 |
| 4. | Generally , the maximum tangential compressive strain was 2 ~ 4 times of vertical and radius - orientation direction
环向最大压应变一般为同一监测层位竖向、径向最大压应变的2 ~ 4倍。 |
| 5. | The filament winding angle when the fiber volume fraction of hoop orientation was equal to that of axial orientation was calculated
最后计算了轴向取向和环向取向纤维体积含量相等时缠绕角的值。 |
| 6. | Plastics piping systems . glass - reinforced thermosetting plastics pipes . determination o the apparent initial circumferential tensile strength
塑料管道系统.玻璃增强式热固性塑料管件.表观初始环向抗拉强度的测定 |
| 7. | The maximum tangential compressive reaches 2221 , which is about 76 . 6 % of the ultimate compressive strain , within safe status
在龙固副井施工中，井壁环向最大压应变达2221 ，约为极限压应变的76 . 6 % ，处于安全状态。 |
| 8. | Through extending the wear plate at the saddle and using the flexible saddle , the circumferential peak stress at the joint of the shell and the saddle can be decreased efficiently
本文介绍通过鞍座上垫板的伸出和采用柔性鞍座，即能有效地降低鞍座边角处的环向峰值应力。 |
| 9. | Abstract : through extending the wear plate at the saddle and using the flexible saddle , the circumferential peak stress at the joint of the shell and the saddle can be decreased efficiently
文摘:本文介绍通过鞍座上垫板的伸出和采用柔性鞍座，即能有效地降低鞍座边角处的环向峰值应力。 |
| 10. | The reason that the internal defects little occur at the center points and fissure takes an annular form during three - roll rolling was expounded based on the state of stress and strain at the center of rolled pieces
根据轧件内部的应力应变状态，阐述了三辊轧制轧件中心点缺陷产生可能性较小和断裂呈环向裂纹的原因。 |
