| 1. | Two basic forms of the resistance strain gage are the bounded and the unbounded types .
电阻应变片有粘贴式和非粘贴式两种基本形式。 |
| 2. | An experiment on resistance strain gage to pit test for electromechanical main bearing
用电阻应变片检测电机主轴运行故障的方法 |
| 3. | Acceleration sensor is used to test modal displacement , and strain sensors are used to test modal strain
振动测试中分别采用加速度传感器进行位移模态分析以及电阻应变片进行应变模态分析。 |
| 4. | Through the flexural failure tests , it is show that the measured results of fbg sensor and strain gauge are nearly same
试验梁通过弯曲破坏试验比较布拉格光栅传感器与电阻应变片的测试结果。 |
| 5. | 9 pieces of rc test beams were fabricated , the fbg sensors and strain gauges were mounted in the tensile steel , compress concrete and cfrp of the tested beams
制备9根rc试验梁,将fbg传感器与电阻应变片同时预置于实验梁内(受拉钢筋、压区混凝土及碳纤维复合材料中) 。 |
| 6. | The conventional resistance strain sensor has played the key role in short - time strain measuring . however , it also has some disadvantages in some aspects
针对大型民用基础设施的长期在线应变测量，常规的电阻应变片难以满足其施工监测以及服役期间的状态监测的需要。 |
| 7. | The designed wireless strain collection and transmission system has such characteristic as miniaturization . it can overcome the lacks of the traditional wired system and be
文中提出的基于电阻应变片的无线采集传输系统具有小型化的特点,能克服传统有线采集系统的不足,更适合在现场测试中应用。 |
| 8. | The sensor adopted micro melts technology and introduce aviation application science and technology ; using high temperature glass the micro processing silicon voltage dependent resistance strain gauge to melt on the stainless steel diaphragm
传感器采用的微熔技术，引进航空应用科技，利用高温玻璃将微加工硅压敏电阻应变片熔化在不锈钢膜片上。 |
| 9. | 3 in experiment the common electrical - resistance strain gages is used as receiver to replace the pzt or velocity and acceleration transducer which is frequently used in pipeline not
3 、实验采用动态电阻应变电测法，采用普通的电阻应变片作为接收传感器，代替了通常用于管道检测的压电探头或桩基完整性检测的反射波法中使用的速度传感器或加速度传感器。 |
| 10. | According to the requirements of oil salvage operation and ground equipment , research and develop a system to conduct the dynamic test on the speed and position of oil extractor , and the tension supported by steel wire , with c8051f330 single - chip microcomputer as the core module , hall - effect sensor and resistance sensor as the test components
摘要根据捞油作业和地面设备的需求，研制一种以c8051f330单片机为核心，采用霍尔传感器和电阻应变片作为检测元件，实现付捞油抽子升降速度、位置和钢丝拉绳所承受拉力的动态检测系统。 |
