| 1. | Knife shaft can be 360 degree adjusted by electric control
刀轴可做360度电动控制相位调整。 |
| 2. | Knikfe shaft can be 360 degree adjusted by electric control
刀轴可做360电动控制相位调整。 |
| 3. | These adjust the linearity and carry out small phase adjustments
这些电池调整线性和执行小的相位调整。 |
| 4. | Apc automatic phase control
自动相位调整 |
| 5. | This can be useful when the correct adjustment cannot be carried out through amplitude , threshold and phase adjustment
通过振幅，开端和相位调整，当正确的调整不能被执行时，这个能有用。 |
| 6. | The difference clock delay match technology adjusts the two channel ad analog clock phase and implements the two way ad uniformly - space sampling
差分时钟延迟匹配技术通过对两路ad的采样时钟进行相位调整,实现了两路ad的等间隔采样。 |
| 7. | When the phase is changed , the used phase transformers is voltage - control phase transformer which is changed by phase transformer consist of ordinary operation amplifier consist of ordinary operational amplifier
在相位调整时所运用的移相器是由普通运算发大器构成的移相器改造成的压控移相器。 |
| 8. | The upper slotting / crease shaft is using automatic plane minor adjustment sysem , also allow roational adjustment of 360 degrees whatever operating or stop . the slotting shaft also using zero - storing system
上刀轴装设平面式自动微调装置,刻度清晰,不论运转或停上均可做360相位调整,刀轴及附自动归零装置。 |
| 9. | The 33220a external frequency reference lets you synchronize to an external 10 mhz clock , to another 33220a , or to an agilent 33250a . phase adjustments can be made from the front panel or via a computer
33220a外部频率基准使您能同步于外部10mhz时钟另一台33220a ,或agilent33250a .相位调整可从前面板或通过 |
| 10. | This method link amplitude adjust with phase adjust together , and perform coordinate control . by the simulation principle , the ct error compensation can be realized through operational amplifier , integrate circuit , fet , and other electronic component
这种方法将电流互感器的相位调整和幅值调整结合到一起，进行协调控制，运用模拟原理，并采用运算放大器，场效应管等电子器件实现了电流互感器的误差补偿。 |
