| 1. | Vacuum sintering furnace
真空烧结炉 |
| 2. | Hip - sinter stove is one of the key equipments in the horniness - alloy ’ s manufacture
低压真空烧结炉是硬质合金烧结的关键设备。 |
| 3. | Damping properties of aluminum foams produced by pressing - dissolution - vacuum sintering process
真空烧结法制备泡沫铝的阻尼性能研究 |
| 4. | Then , at the base of analysis of the technics process , designed the autocontrol technics flow chart of hip - sinter stove
然后,在工艺过程分析基础上设计了低压真空烧结炉自动控制工艺流程。 |
| 5. | For prolonged atmospheric sinter firing and infiltration firing of vita in - ceram frameworks created using the slip technique
用于由堆涂技术制成的vita全瓷支架的长时间非真空烧结和渗透培烧。 |
| 6. | Limn2o4 films made under these conditions showed good performances , so synthesizing limn2o4 film at low sintering temperatures was realized
最后对真空烧结进行初步探讨,在较低的烧结温度下制备出了电性能较好的limn204薄膜,实现了低温合成limn2o4薄膜电极。 |
| 7. | The results showed that the interfaces strengthen between sic particles and aluminum would be improved by the interface reaction between them . the fracture of this composite would occur mainly in al matrix
研究结果表明：真空烧结过程中出现了界面反应，改善了界面结合强度，断裂破坏主要在al基体上进行。 |
| 8. | It discusses not only a kind of new vacuum jointing process in ic packaging but also its theory and background . besides , it enumerates the remarkable achievements by implementing this process
摘要论述了在集成电路生产中一种新的真空烧结工艺，讨论了它的理论依据及产生背景，并列举了通过实行该工艺所带来的显著成绩。 |
| 9. | Abstract : in this paper , the porous - metal nickel was prepared by filling pore - forming material and vacuum sintering process . the influence of pore - forming material on the properties of porous - metal nickel was discussed
文摘:采用添加造孔剂、真空烧结工艺制备了多孔金属镍材料，并主要讨论了造孔剂含量对材料性能的影响。 |
| 10. | The company iso9001 - 2000 quality system certification , the company specialized research and development of low - power , high - efficiency high - quality vacuum heat treatment furnace and vacuum brazing furnace , vacuum sintering furnace
公司通过iso9001 - 2000质量体系认证，公司专门研制开发低能耗、高效益高品质的真空热处理炉和真空钎焊炉、真空烧结炉。 |
