Mobile
Log In Sign Up
Home > chinese-english > "纤维强度" in English

English translation for "纤维强度"

fiber strength
fiber stresss
fibre strength


Related Translations:
强度:  intensity; strength; magnitude; stringency; strike; avidity 短语和例子辐射强度 radiation intensity; 抗震强度 shock strength; 劳动强度 the intensity of labour; 工作强度 working strength; 抗拉强度 tensile strength
Example Sentences:
1.The fibers lose strength and become brittle .
纤维强度下降,且易断。
2.To avoid overmany crossings of fw layers , which reduce the using of the filament strength , the number of the tangency points is chosen to one
为了避免fw层的交叉点过多而影响纤维强度的发挥,所选择的切点数为1个。
3.( 2 ) after modification with nano - particles , the strength of uhmwpe fiber has no obvious change , the modulus increases greatly , while the breakage elongation decreases a little
用纳米粒子改性后,纤维强度基本不变,模量大大提高,断裂伸长有所减小。
4.The tensile strength of carbon fibers generally lowered than that without heat - treatment , and the decreased value was various with the different temperature treatment
高温处理导致炭纤维拉伸强度发生较大损失,在本次试验中,在不同的热处理温度下,纤维强度下降的程度不同。
5.When draw down ratio was greater than 1 , the dope thread in the air gap was axially drawn with the rising of orientation degree so the fiber tenacity was strengthened
在喷头拉伸比大于1的情况下,原液细流在空气层中得到轴向拉伸,加大了初生纤维的取向度,所以纤维强度得到加强。
6.Simultaneity , various single fiber strength tests ( sft ) and the single fiber fragmentation techniques were discussed , and the influence of fiber surface treatment on the single fiber strength and the interface load - transfer were discussed in detail . the two parameters weibull statistic theory was used to evaluate the scattering of the tensile strength test results of three types of single fibers with different surface treatments . the following conclusions can be drawn based on the analysis of the results
同时,文中详细讨论了单纤维强度测试实验( sft )和单纤维复合材料断裂实验( sfc ) ,重点讨论了纤维表面处理对单纤维拉伸强度和界面载荷传递能力的影响;采用两参数weibull统计理论对经过三种不同表面处理的单纤维拉伸强度的测试结果的分散性进行了评价,获得了理想的实验结果;分析实验结果可得到如下结论, sft实验与sfc实验获得的界面剪切强度吻合良好;经过表面处理的玻璃纤维的界面粘结情况较未经处理的玻璃纤维好;经过表面处理的玻璃纤维的界面粘结强度和单纤维拉伸强度均高于未经表面处理的玻璃纤维。
7.This was due to three reasons : ( 1 ) baso4 particles were rigid inorganic particles , which could hinder the retraction of polymer molecules and decreased the elasticity . ( 2 ) a bad compatibility between baso4 and tpu , small interface adhesive force and the phase interface ready to separate . ( 3 ) during high content of baso4 , the tenacity of filament mainly depended on tpu , so that the strength decreased with the content of tpu in filament down
这是因为: baso _ 4属于刚性粒子,阻碍tpu大分子链的回缩,降低了纤维的弹性; baso _ 4与tpu相容性极差,共混时容易形成相界面,界面结合力小,受外力作用时相与相间容易发生分离,使纤维的力学性能下降; baso _ 4在高含量下,纤维强度主要由聚合物的力学性能决定,随着baso4含量的增加, tpu所占比例下降,从而在宏观上表现出纤维的力学性能下降。
Similar Words:
"纤维七糖" English translation, "纤维起毛" English translation, "纤维潜在卷曲能" English translation, "纤维枪喷成型" English translation, "纤维腔" English translation, "纤维强度试验器" English translation, "纤维强化" English translation, "纤维强化的" English translation, "纤维强化复合材料" English translation, "纤维强化混泥土,纤维增强混泥土" English translation