Mobile
Log In Sign Up
Home > chinese-english > "胶含量" in English

English translation for "胶含量"

resin content

Related Translations:
铀含量:  content of uraniumunanium contenturanium content
细胞含量:  cellularity
纸浆含量:  pulcontent
烃含量:  hydrocarbon content
流体含量:  fluid content
物含量:  insolubles
碱含量:  alkali content
同位素含量:  isotopic abundanceisotopic content
体含量:  body burden
净含量:  net contents
Example Sentences:
1.Natural rubber latex concentrate - determination of dry rubber content
胶含量的测定
2.Natural rubber latex concentrate - determination of dry rubber content
浓缩天然橡胶胶乳.干胶含量的测定
3.Test methods for determination of gel content and swell ratio of crosslinked ethylene plastics
交叉链接的聚乙烯塑料膨胀率和胶含量测定方法
4.Comparison between the test methods for the measurement of the gel content in xlpe insulation compounds
交联聚乙烯绝缘料凝胶含量试验方法比较
5.Standard test methods for determination of gel content and swell ratio of crosslinked ethylene plastics
交联乙烯塑料的凝胶含量和膨胀系数的标准试验方法
6.D - glucosamine hydrochloride is also blended with chitosan to prepare anti - operational adhesion membrane by solution casting
胶含量为9的膜显示出最佳的防粘连作用,组织相容性良好。
7.It was found that the mmt was exfoliated and intercalated in san resin . the mechanical properties of the san / mmt composite were improved
把san mmt作为母料与高胶含量的abs接枝粉料混合,发现复合材料abs mmt的抗冲,拉伸强度均有所提高。
8.With the increase of silane content , the content of gelatin increased continuously and ntc phenomenon disappeared gradually . when the silane content reach a certain volume , the ntc phenomenon was eliminated completely , at one time , the content of gelatin keep stable . 4 、 heating treatment can improve ptc characteristic of composite and increase ptc intensity . when the temperature and time of
随着硅烷含量的增加凝胶含量不断的增加, ntc现象逐渐消失,达到一定值时ntc现象消失,凝胶含量不再提高; 4 、热处理可以改善导电复合材料的ptc特性,提高它的ptc强度,热处理温度为120 ,热处理时间为30h时效果最为明显。
9.The studies expressed that the tensile - strength declined with the growth of dose rate after the radiation treatment , and at the same time , the gel content had extreme value with the change of the dose rate . the surface of uhmwpe fibers showed some irregular micro - pits and dents after radiation treatment , narnely rough degree increasing . their number and deepness increased with increase of dose . and this phenomenon is the most obvious when the dose rate was 8 . 5kgy / s and the dose was 400kgy . at the same time some containing oxygen groups , including hydroxyl group , carbonyl group and carboxyl group , were introduced into the fiber surface which was exposed to the air
研究表明, uhmwpe纤维经电子束辐照处理后,纤维的拉伸断裂强度随剂量率的增加呈下降趋势,凝胶含量随着剂量率的变化存在极值。纤维表面出现了不规则的微裂纹和凹痕,随着剂量的增大,电子束对纤维表面的刻蚀程度增加,在本研究中以剂量为400kgy剂量率为8 . 5kgy s时刻蚀效应最为明显。同时,在空气中进行辐照时,纤维表面被引入了一些含氧基团,包括羟基、羰基和羧基。
Similar Words:
"胶辊转印式涂布机" English translation, "胶辊砻谷机" English translation, "胶滚" English translation, "胶锅" English translation, "胶过滤" English translation, "胶含有半乳糖,甘露糖的一种天然植物胶" English translation, "胶核" English translation, "胶合" English translation, "胶合,粘附,附着力" English translation, "胶合,粘接" English translation