English translation for "螺栓头"
|
- [ luóshuāntóu ]
bolt head; gib head
◇螺栓头锻造机 bolt header
Related Translations:
联结螺栓: binder boltcoupling bolt 尖头螺栓: clasp boltfin neck boltni ed boltnibbed boltpointed boltspiked bolt 轮毂螺栓: boss boltwheel boltswheel hub bolt 强力螺栓: high tension boltstrengthening screw bolt 垂直螺栓: stehbolzen stud bolt
- Example Sentences:
| 1. | Apply wrench to hex next to pipe and guard against possible distortion
将扳手套在靠近管道的六角螺栓头上避免可能产生的变形。 | | 2. | Specification for shapes and dimensions excluding thread dimensions of plough bolt heads for earth - moving machinery
运土机械的防松螺栓头外形和尺寸 | | 3. | En2357 aerospace series . stud - ends , in corrosion resisting steel swaged on type , control calble . dimensions and loads
航空航天系列.操纵钢索锻制型耐腐蚀钢制柱螺栓头.尺寸和负载 | | 4. | 235 bolts , normal hexagonal head , threaded to head , in alloy steel , cadmium plated - classification : 900 mpa at ambient temperature 235 c
镀镉的合金钢的螺纹至螺栓头的标准六角头螺栓.等级: 900 mpa | | 5. | 425 bolts , normal hexagonal head , threaded to head , in corrosion resisting steel , passivated - classification : 600 mpa at ambient temperature 425 c
钝化处理的耐蚀钢的螺纹至螺栓头的标准六角头螺栓.等级: 600mpa | | 6. | Bolts , large bihexagonal head , normal shank , short or medium length mj threads , metallic material , coated or uncoated , strength classes 1250 mpa to 1800 mpa - dimensions
强度等级小于或等于1250mpa - 1800mpa的有涂层或无涂层短长度或中长度mj螺纹的由金属材料制成的标称大12角螺栓头标称杆螺栓.尺寸 | | 7. | Bolts , normal bihexagonal head , normal shank , short or medium length mj threads , metallic material , coated or uncoated , strength classes less than or equal to 1100 mpa - dimensions
强度等级小于或等于1100 mpa的有涂层或无涂层短长度或中长度mj螺纹的由金属材料制成的标称12角螺栓头标称杆螺栓.尺寸 | | 8. | Bolts , normal bihexagonal head , normal or pitch diameter shank , long length mj threads , metallic material , coated or uncoated , strength classes less than or equal to 1100 mpa - dimensions
强度等级小于或等于1100 mpa的有涂层或无涂层长长度mj螺纹的由金属材料制成的标称12角螺栓头标称或节径杆螺栓.尺寸 | | 9. | In order to find the detecting signal characteristics of all kinds of flaws for ect and ac - mfl , itestablished the signal analysis method based on rectangular flaw , which was validated throughthe experimental research on ect and the emulational research on ac - mfl for different shapeand dimension flaws . the method was explained that a flaw with an arbitrary shape can berepresented as a set of flaws with the simplest rectangular shape . as the synthetic application of these researches , the problem of defect detection of bolt wasresearched
为实现螺纹区域中的缺陷检测,提出了提取局部极大值的缺陷识别方法;并根据位置的不同将缺陷分为螺杆结合部缺陷、螺纹区域缺陷以及螺纹尾部缺陷三类,对每类缺陷的信号特点进行了分析,给出了缺陷检测的判据,并通过实验验证了识别方法的可靠性;最后对螺栓头杆结合部的缺陷检测进行了实验研究,并根据信号特点建立了相应的缺陷检测方法。 | | 10. | The main popular theoretical method adopted to study end - plate connection is finite element technique under monotonic loading at present . this paper applies nonlinear ( material , geometry and contact ) finite element method to analyze the behaviors of connections under cyclic load at fist time . contact elements are set between end plate and column flange , screw cap and neighborhood plane , bolt bar and hole
对于端板连接的理论分析，目前国内外的研究主要局限在单向加载有限元分析范畴，本文首次采用三维非线性(包括材料、几何与状态非线性)有限元对端板连接进行了循环加载分析，端板与柱翼缘间、螺栓头(帽)与相邻板件间、螺栓杆与孔壁间都设置了反映边界状态的接触单元。 |
- Similar Words：
- "螺栓套丝机" English translation, "螺栓套筒" English translation, "螺栓提圈" English translation, "螺栓体" English translation, "螺栓铁" English translation, "螺栓头,长颈烧瓶" English translation, "螺栓头冲压" English translation, "螺栓头锻造机" English translation, "螺栓头镦锻机" English translation, "螺栓头镦压机" English translation
|
|
|
