| 1. | Attenuated total reflectance
衰减全反射比 |
| 2. | Analysis of leather products by fourier transform attenuated total reflection infrared spectroscopy
傅里叶变换衰减全反射红外光谱法鉴定皮革产品 |
| 3. | This characteristic enables the realization of many novel optoelectronic devices based on this configuration . in this dissertation , a new type of electro - optic polymer modulator base on atr is introduced
本文即以衰减全反射结构为研究内容，提出用这一结构来实现一种新型光电子器件的思想? ?衰减全反射型聚合物电光调制器。 |
| 4. | The results of attenuated total reflectance - fourier transform infrared ( atr - ftir ) , x - ray photoelectron spectroscopy ( xps ) and contact angle measurement showed that the amphiphilic copolymer could self - segregate on the hydrophobic pdl - la surface
利用衰减全反射傅立叶转换红外光谱( atr - ftir ) 、 x -射线光电子能谱( xps )分析以及接触角测定对改性聚乳酸材料表面进行了表征。 |
| 5. | Omni sampler , the attenuated total reflection accessory of the fourier transform infrared spectrometer , was used to analyze the infrared spectrum of chloride butyl rubber and brominized butyl rubber bottle closures used as medical and pharmaceutical package
摘要采用傅里叶变换红外光谱仪的衰减全反射附件omni采样器，对医药包装用氯化丁基橡胶和溴化丁基像胶瓶塞样品进行了红外光谱分析。 |
| 6. | In the attenuated - total - reflection ( atr ) multi - layer structure , light reflectivity can be highly dependent on layer parameters such as the layer thickness and refractive index . a tiny change in these parameters can lead to a large change in the light reflectivity
衰减全反射( atr )结构是光学上一种较为特殊的反射型结构，在一定的条件下，反射光的空间强度和频谱成分都会受到结构参数的影响和控制，同时反射光也携带上了结构本身的信息。 |
| 7. | This modulator works with the guided - wave reflectance peak , in which the light intensity is changed by the variation of the refractive index of poled polymer due to the electro - optic effects . device performances have been theoretically and experimentally investigated . we also successfully carried out experiments of video signal transmission using the proposed modulator
该调制器工作于金属包覆波导的衰减全反射导模吸收峰，利用极化聚合物电光材料的折射率对导模吸收的影响来实现电光调制，并对器件的性能指标进行了实验研究，同时利用制作的反射型电光调制器进行了视频信号良好地传输实验。 |
| 8. | A quantitative analysis on the surface of the plate composite membranes with various polymerization tune was made on the basis of the feature absorption to ir by means of attenuated total reflection - fourier transform infrared spectroscopy . the results showed that polyamide functional layer grew thick with the polymerization time going on . this indicates that the polyamide functional layer formed on the interface cannot separate the w / o phases to stop the reaction
利用衰减全反射-傅立叶变换红外( ftir - atr )对不同聚合时间的平板复合膜表面进行了特征吸收定量分析，研究发现，聚酰胺功能层随聚合时间不断增厚，这说明已形成的聚酰胺功能层不能屏障两相而终止反应，相反由于哌嗪单体的分子量远低于纳滤截留分子量的范围，很易扩散穿过功能层达到两相界面，继续与有机相单体酰氯反应。 |
