| 1. | Fully , hydraulic design high press sure are possessed to join outs ole to shoe firmly
本机采用全油压设计压力大贴合牢固。 |
| 2. | Adopting oil hydraulic design , the machine has high pressure to make a firm and solid adhesion
本机采用全油压设计压力大贴合牢固。 |
| 3. | Therefore the pressure in the relief pipe system is lower than 10 % of the set pressure of the rupture disc
因此压力放散系统的压力低于爆破片设计压力的10 % 。 |
| 4. | Gas welding equipment . rubber and plastic hoses assembled for compressed or liquified gases up to a maximum design pressure of 450 bar
气焊设备.能承受最大设计压力450巴的压缩和液化气用橡胶和塑料软管组件 |
| 5. | In a short , answer to the optimizing length of porous pipe is very important in optimum design of trickle system
毛管和支管的直径以及设计压力水头一定的情况下，大于或小于毛管的经济长度，都会使滴灌系统的费用增加。 |
| 6. | The result indicates that the designed pressure loss of water systems is large among various loops for different air conditioning system zones
结果表明，对应建筑不同使用功能的空调系统分区，其水系统各支路之间设计压力损失相差较大。 |
| 7. | Static pressure is the designed pressure difference within the pipeline between two testing points . it is a necessary date when selecting different types of pressure gauges
静压是差压表两个检测点所在管道内的设计压力。它是差压压力表选型时必需的数据。 |
| 8. | Differential pressure gauges is used to test the pressure difference between two points , it is a mechanical pressure gauge that can directly indicate the pressure difference on the instrument meter
静压是差压表两个检测点所在管道内的设计压力。它是差压压力表选型时必需的数据。 |
| 9. | In case of a vertical veseel tested horizontally in the shop , the test pressure shall relate to the design pressure adjusted for static head when the unit is in the vertical position
5如果立式容器在车间进行水平测试,测试压力应相对设计压力进行调整，当装置在立式位置时调整静封头。 |
| 10. | Abstract : this paper introduces the global stiffness , strength and stability of bracing structure with long span , pointing out that the control of bracing structure ' s deflection and elastic module can make the arch ring fit the line of pressure and arch axis and can guarantee the stability of bridge structure
文摘:本文介绍了大跨度支撑结构的整体刚度、强度和稳定性，控制支撑的挠度和弹性变量可使拱圈符合设计压力线与拱轴线，保证桥梁结构的稳定性。 |
