Mobile
Log In Sign Up
Home > chinese-english > "调幅系数" in English

English translation for "调幅系数"

amplitude-modulation factor

Related Translations:
调幅法:  modulation method
调幅脉冲:  amplitude-modulated pulse
脉冲调幅:  pam: pulse amplitude modulation
以调幅:  am-vsb
自调幅:  sam self-amplitude modulation
调幅变压器:  amplitude modulation transformer
调幅信号:  amplitude modulated signalamplitude-modulated signal
调幅电台:  amplitude modulation station
调幅监视器:  amplitude-modulation monitor
定向调幅:  directional amplitude modulation
Example Sentences:
1.Moment modified factor
弯矩调幅系数
2.( 3 ) total coefficient of modulation of moment for the frame applied horizontal load and vertical load is bigger than that of the same frame applied vertical load
( 3 )框架既承受水平荷载又承受竖向荷载时的总弯矩调幅系数比相同结构只承受竖向荷载的总弯矩调幅系数大。
3.Then limiting load is decreased . ( 6 ) horizontal load can increase the coefficients of the modulation of moment when value of is little while decrease it when is large
( 6 )在中支座截面相对受压区高度较小时,有水平荷载的框架其弯矩调幅系数要大于只有竖向荷载的框架。
4.The testing results indicate that the hrb400 continuous reinforced beam not only can achieve plastic internal force redistribution thoroughly and also has enough capability in the amplitude adjustment and can achieve the quotient designed
试验研究结果表明, hrb400级钢筋混凝土两跨连续梁能够达到完全的弯矩重分布,并且具有足够的调幅能力,能达到设计的调幅系数
5.So , for the design of prestressed frame , the later coefficient may be considered as the parameter of modulation of moment and the moment modulated is the moment caused by the vertical load plus the one by the horizontal load
因此,在预应力框架设计中,可以取只承受竖向荷载的弯矩调幅作为其调幅标准,调幅弯矩为竖向荷载产生的弯矩与水平荷载产生的弯矩之和,即用最小的弯矩调幅系数来调整截面的弯矩。
6.At last , with the program , 18 one - storey and one - span prestressed frames are simulated . some conclusions are reached with the taking into account the , secondary moment and types of load applying : ( 1 ) the in the beam affects the ductility of the section and rotary property of the plastic hinge . so total coefficient of the modulation of moment becomes less with the becoming bigger
最后,本文利用编制的非线性程序,模拟了18榀单层单跨预应力框架,重点研究截面相对受压区高度、次弯矩、加载方式对塑性内力重分布和弯矩调幅的影响,从中得出了以下主要的结论和规律: ( 1 )框架梁相对受压区高度在很大程度上反映了截面的延性,体现了塑性铰的转动能力,框架的总弯矩调幅系数随着相对受压区高度的增大而减小。
7.( 2 ) if secondary moment is taken for one kind of modulation of moment and there are the same , the effect of secondary moment on the modulation of moment becomes bigger with secondary moment becoming bigger . if prestressed frame can not complete full redistribution of internal force , ultimate load may put off and put up because of secondary moment . total coefficient of modulation of moment also is bigger
( 2 )如果把次弯矩看着是对框架的一种弯矩调幅,在相同的相对受压区高度下,次弯矩越大,次弯矩调幅作用越强;如果结构不能实现完全的内力重分布,则次弯矩能够延缓截面极限承载力的到来,提高结构的极限承载力,结构总的弯矩调幅系数也随着次弯矩的增大而增大。
Similar Words:
"调幅锁模" English translation, "调幅通信系统" English translation, "调幅无线电报" English translation, "调幅无线电话" English translation, "调幅无线电设备" English translation, "调幅系统" English translation, "调幅谐函数" English translation, "调幅信号" English translation, "调幅压缩" English translation, "调幅遥测发射机" English translation