| 1. | Full - scale test of battened tubular column in new beiyun international airport terminal
新白云国际机场航站楼钢管缀板柱足尺试验 |
| 2. | Because the size of tubular joints used in practice engineering is always large , the full scale tests study is of significance much more
由于实际工程中，钢管相贯节点的尺寸一般比较大，足尺试验研究则更具研究意义。 |
| 3. | Finite - element study on the ultimate strength of gusset plate connections to slotted tubes and full scale tests on the ultimate strength of the connections are researched in this dissertation
本文研究的主要内容为管板节点受压极限承载力非线性分析和足尺试验研究两部分。 |
| 4. | Full scale tests on 3 tube - to - plate joints is carried out in this dissertation . then the tests result is compared with results of finite - element analysis the difference of them are analyzed
本文对3个管板节点,进行了静力单调加载的足尺试验,得到了其破坏模式和极限承载力。 |
| 5. | Three kinds of bolted extended end - plate connections are tested . a series of parameters representing connections behavior are investigated and compared between the three types of connections . 2
进行了三种螺栓端板连接节点的足尺试验，分析比较了它们的承载力、塑性变形能力等； 2 |
| 6. | A full - scale experimental study and associated nonlinear finite element analysiswere undertaken to study the ultimate tensile strength of gusset plate connections toslotted tubes in this dissertation
本文研究的主要内容包括管板节点受拉极限承载力非线性有限元分析和足尺试验研究两部分。 |
| 7. | Finite - element study on the ultimate strength of planer overlap tubular k - joints and full scale tests on the ultimate strength of chs joints are researched in this dissertation
本文研究的内容主要包括平面k型圆钢管搭接节点极限承载力的有限元研究和圆钢管相贯节点极限承载力的足尺试验研究两部分。 |
| 8. | The effects of goodroad enhanced asphalt mixture and glass fiber grid for resisting reflection cracking are proved by full - scale test , the resisting mechanism is analyzed , too
通过反射裂缝足尺试验来评价goodroad增强沥青混合料和玻璃纤维土工格栅对抑制反射裂缝的效果，对抑制机理做了分析。 |
| 9. | Full scale tests on six chs joints , including 2 k - joints , 3 kk - joints and 1 kkt - joints , used in roof structures of the palaestra in chang sha is carried out in this dissertation
本文对长沙贺龙体育场钢屋盖结构中的6个圆钢管相贯节点，其中包括2个k型节点、 3个kk型节点和1个kkt型节点，进行了静力单调加载的足尺试验。 |
| 10. | Because the size of tubular joints used in practice engineering is always large and the small size one tries a simulation actual conditions very difficult to be accurate , so the full scale tests study is of significance much more
在实际工程中,管板节点的尺寸一般比较大,而小尺寸的试件很难准确模拟实际情况,所以足尺试验研究则更具研究意义。 |
