English translation for "轮压"

wheel- pressure
◇轮压机 wheel press

Example Sentences:

	1.	Next , the press pulley will be moved down owing to the pressure of a cylinder , the aluminum spacer bars will be moved and be glued under the glue nozzle 摆动气缸动作、压轮压下，压送铝间隔框行进，当间隔框到达打胶头时开始打胶，将胶均匀地涂在铝间隔框上。
	2.	The safety of the running train is an important subject in railway vehicle system dynamics . the condition of derailment and indices of vehicle are important parameters that are defined for safety evaluation of the running train . according to the running condition of vehicle , the paper discusses derailment safety of vehicle in four respects : the coefficient of derailment for a single wheel , the coefficient of derailment for wheel - set , the derailment condition caused by wheel load reduction , relation between the coefficient of derailment and the rate of wheel load reduction . factors affecting the indices are systematically investigated . suitable conditions of derailment of vehicle are given . the results show that h / p1 can be used to evaluate the derailment safety , inwhich h is a force acting on wheel - set in the direction of lateral and p1 is a force acting on the derailment wheel in the direction of vertical 车辆脱轨条件和评定指标是衡量车辆安全运行的重要指标.根据车辆运行状态，从单轮脱轨条件和评定指标、轮对脱轨条件和评定指标、由轮重减载引起脱轨的条件、脱轨系数与轮压减少率的关系等4个方面对车辆的脱轨安全度进行了探讨，分析了影响车辆脱轨的因素，并指出车辆脱轨评定条件的适用情况.结果表明，采用作用于轮对的侧向力h与作用于脱轨侧车轮的垂直力p1之比检算车辆的脱轨安全度较为合理
	3.	Firstly , the steel frame is generally investigated and inspected , including the surface status , distortion , strain of the crane - beam , horizontal load and wheel - stress of the crane , dynamic characteristic and reaction of tne frame , so on . in this way . the particular status and characteristic of this kind of steel frame are mastered 首先，对钢框架进行了全面的调查和检测，包括钢框架的外观状况、变形、吊车梁应变、吊车轮压和水平荷载、框架动力特性和动力反应等，掌握了该类钢框架在实际使用过程中的具体特性和状况，并提出吊车轮压和水平荷载的测试方案和推断方法。
	4.	When the transportation load is long - term evenly distributed , the influences of each relevant factor , i . e . pipeline depth , diameter , deformation module of foundation , poisson ratio of soil and tyre pressure of vehicles , toward mises stress and vertical displacement of pipelines are discussed . when the transportation load is movable and invariable , the changing rules of mises stress and vertical displacement during the vehicle ' s movement are calculated and analyzed , and effects of vehicle velocity and tyre pressure toward these two mechanical characteristics are discussed . when the transportation load is stable and simple harmonic , the changing rules of mises stress and vertical displacement during the time of load function are calculated and analyzed , and effects of vehicle velocity and tyre pressure toward these two mechanical characteristics are also discussed . in three - dimensional analysis , mises stress and vertical displacement of pipelines under three kinds of transportation loads are calculated , and the analysis and discussion of correlative factors are also made 当交通荷载为长期均布荷载时，讨论了各相关因素，包括管道埋深、管径、地基变形模量、地基泊松比和车辆轮压大小分别对管道mises应力和竖向位移的影响；当交通荷载为移动恒载时，计算并分析了车辆行驶过程中管道mises应力和竖向位移的变化规律，讨论了车速和车辆轮压对这两个管道力学性状的影响；当交通荷载为稳态简谐荷载时，计算并分析了荷载作用时间内管道mises应力和竖向位移的变化规律，讨论了车速和车辆轮压对管道力学性状的影响。
	5.	The design manual falls into three parts : chapter 1 , as the overal design part , mainly descirbes how to determine which mechanisms with what metal structures shall be used and illustrates how to design its boom structure and balancing system , including point search , calculation and check ; chapter 2 introduces how to design the crane ' s running gear , including model selection , wheel pressure calculation and overall stability check ; and chapter 3 deals with model selection of its lifting mechanism and related calculations 说明书详细的介绍了该型号起重机的总体设计及行走机构设计和计算过程，总共分为三章：第一章为起重机总体设计部分，主要内容是起重机各机构和金属结构型式的确定，并用作图法对臂架结构和平衡系统进行设计,包括了机构找点，验算及校核；第二部分是运行机构的设计计算，包括了运行机构的选型，轮压计算，整机稳定性校核；第三部分为起升机构的传动方案选型和设计计算。
	6.	The manual introduced the total design and compute the process detailedly about the general design and the running gear design , which divided into altogether three chapter : chapter 1 for total design part of this crane , the main contents is each organization of crane and the metals structure patterns to really settle , and carry on the design to a structure of jib arm and counterbalance system by graphing method , including seeking the point , checking to calculate and school pit ; the second part is a design calculation that circulates the organization , including to circulate the organization to choose the type , the round presses calculation , the stability checking of the whole machine ; the third part is to choose the driving motion version of the hoisting mechanism 说明书详细的介绍了该型号起重机的总体设计及行走机构设计和计算过程，总共分为三章：第一章为起重机总体设计部分，主要内容是起重机各机构和金属结构型式的确定，并用作图法对臂架结构和平衡系统进行设计,包括了机构找点，验算及校核；第二部分是运行机构的设计计算，包括了运行机构的选型，轮压计算，整机稳定性校核；第三部分为起升机构的传动方案选型和设计计算。

Similar Words：

"轮询装置" English translation, "轮询字符" English translation, "轮询字元" English translation, "轮训" English translation, "轮训班" English translation, "轮压测定器" English translation, "轮压成为固定的形式" English translation, "轮压机" English translation, "轮压展机" English translation, "轮牙" English translation