| 1. | Dimensional analysis of the collection coefficient wire covered by ice
导线覆冰时收集系数的量纲分析 |
| 2. | Analysis and application of dimension
量纲分析及其应用 |
| 3. | The analogical ratio between scale models with less ballast and their prototypes are provided by the dimensional analysis
摘要采用量纲分析法，推导在配重不足条件下模型和原型的相似关系。 |
| 4. | According to the theory of dimension analysis , the basic thoughts and methods of dimension analysis modeling in the direction of practical engineering prblems are explored
摘要在量纲分析理论的基础上，结合工程实际问题研究了量纲分析建模的基本思路和方法。 |
| 5. | The tank model with scale of 1 : 5 is built and model test is carried out . by dimension analysis , resemblance between archetype and model is confirmed . 2
设计制作了比例系数为1 ： 5的罐体结构模型；通过对影响平台罐体受力状态的各主要物理量的量纲分析，确定了模型与原型结构的相似性；并进行了模型试验。 |
| 6. | Abstract : this paper introduces the buckingham ' s theorem on dimension analysis and proves it by using method of linear algebra . the application of the buckingham ' s theorem is demonstrated by two examples
文摘:介绍了量纲分析中的白金汉定理，并且线性代数的方法予以了证明，通过两则例子说明了该定理的应用。 |
| 7. | Simulation model of laser bending process has been established by dimension analysis with the control model of laser bending achieved based on regression of laboratory simulate data
通过量纲分析建立了板料激光弯曲过程中弯曲角度的仿真模型，根据试验数据对模型的相应参数进行回归求解，获得了该过程的控制模型。 |
| 8. | At the same time , according to the similarity theory and dimension analysis , this research has accomplished the heat convection experiment , and has gotten the calculation method of heat convection coefficient of drum brake
并在相似理论和量纲分析理论的指导下，进行鼓式制动器对流换热实验，得出鼓式制动器对流换热系数的求解公式。 |
| 9. | In this paper , the method of dimensional analysis is used to analyze the interaction between ocean current , pipeline and seabed , and the similarity laws that should be followed in the small - scale laboratory experiments are established
文章应用量纲分析方法对海流、管道与海床之间的动力耦合作用进行了分析，确定了在实验模拟中应遵循的相似准则。 |
| 10. | The method of correcting pulse width , which is in accord with the traditional correcting pressure method , is discussed . the polynomial correcting formula and the pressure correcting formula by means of dimensional analysis and similarity theory are obtained
探讨了符合我国传统压力修正方法的脉宽修正方法，并建立了相应的多项式修正公式和由量纲分析及相似理论获得的压力修正公式。 |
