| 1. | Crystalline procedure and phase structure of bst powders
钛酸锶钡粉体晶化过程和物相结构研究 |
| 2. | The thermodynamic properties of batio3 srtio3 superlattices with the effects of stress
钛酸锶超晶格的热力学性质 |
| 3. | Application of chelator in strontium titanate as lean - burning oxygen sensors
螯合剂在氧敏传感器钛酸锶薄膜制备中的应用 |
| 4. | Influences of dispersion media on electrorheological effects of srtio3 system
分散介质对钛酸锶系电流变液电流变性能的影响 |
| 5. | The pst thin films in which the perovskite structure primarily formed were fabricated successfully on ito / glass substrates by the sol - gel method
本文采用溶胶?凝胶技术在ito基板上成功制备了性能优越的多晶钛酸锶铅薄膜材料。 |
| 6. | Second , srtios - based double function ceramic was achieved with prepared strontium titanate nanocrystalline powder materials by single - fired process
然后，在制备的纳米钛酸锶粉体材料的基础上，采用一次烧成工艺制备srtio _ 3基电容-压敏双功能陶瓷器件。 |
| 7. | The results of transmission electron microscopy ( tem ) showed that the grain of strontium titanate powder prepared was spherical and the grain sizes distribution were homogeneous
通过tem分析可以看出，制备的钛酸锶粉体材料的颗粒为球形，并且颗粒大小均匀。 |
| 8. | ( 2 ) the ysz and sto buffer layers were prepared by sol - gel process on si substrates . the ysz and sto films could be used as the buffer layers between si substrate and ybco films
( 2 )用sol - gel法在si基板上制的钇稳定氧化锆( ysz )和钛酸锶( sto )薄膜作为si与ybco间的缓冲层是可行的。 |
| 9. | First of all , prepare srtio3 powder materials by sol - gel process and solid phase synthesis process . stir time , gel time , gel temperature , heat treat temperature and so on are researched in sol - gel process
用固相合成法制备钛酸锶粉体材料中研究了ti / sr比、研磨方法对制备钛酸锶粉体材料的影响。 |
| 10. | Barium strontium titanate ( bst ) shows high dielectric constant and low dissipation factor and holds great promise for wide applications in dynamic random access memory ( dram ) , transducer and infrared detector
钛酸锶钡( bst )薄膜具有较高的介电常数和较低的介质损耗，在动态随机存储器( dram ) 、传感器、探测器等方面应用前景广阔。 |
