| 1. | Fault solving of yellowing in passivating coating of copper and its alloys
铜及铜合金钝化膜发黄故障的解决 |
| 2. | Composition and structure of the passive film of 304 stainless steel in an occluded solution
304不锈钢在闭塞区溶液中钝化膜组成和结构性能 |
| 3. | The effectiveness of protection of passive film in different solution are sometimes more crucial to determine the corrosion behavior
钝化膜在不同介质中保护效率的差异，有时候也会起到决定性的作用。 |
| 4. | Testing method of the white chromatic conversion coatings existance and the corrosion resistance of the zinc deposits for the light industrial products
轻工产品镀锌白色钝化膜的存在试验及耐腐蚀试验方法 |
| 5. | Organic molybdenum sulphide ( mo ( v ) - cysteine ) was found in passive film . the increase of cr and the appearance of mo were thought an auto - repair behaviour
在该环境介质中cr的增加和mo的出现，初步认为是一种钝化膜的保护性自修复过程。 |
| 6. | Instructions : specially designed for cleaning the aluminous surfaces . it will not damage the passivated layer of the aluminum and can keep the original gross
产品说明：根据铝材特性，专门设计的配方，经该清洁剂清洗的铝材，表面钝化膜不会受损，并且保持原有的光泽。 |
| 7. | The activation and inactivation treatments were employed to prepare the surface inactivate film which can prevent brass surface from corroding and keep the brass colour
采用活化+钝化复合处理新工艺制备的黄铜表面钝化膜能够有效地防止表面锈蚀，并能同时保持金属色泽。 |
| 8. | The result of x - ray photoelectron spectra ( xps ) indicated , after exposure to srb , the ratio of cr / fe had an increase , mo and s were detected in the surface layer of passive film
在srb介质中长期浸泡后的xps分析显示，表层钝化膜中的cr / fe比增加，钝化膜中出现了少量的mo和s 。 |
| 9. | The improvement of the compatibility of nonaqueous electrolytes with electrodes , and the progress on the electrolyte optimization to improve the compatibility of electrolyte with electrodes are introduced
改善电解质与电极的相容性，提高电极表面钝化膜的稳定性是提高电池综合性能的有效途径。 |
| 10. | The effects of the parameters of alternating electric field on the growth of passive film and the dissolution of alloying element in stainless steel were studied by analysis of the composition of passive film and the bath solution
通过对钝化膜层和溶液中金属离子的含量分析，研究了不同交变电场参数对电极中各金属元素的溶解和沉积。 |
