| 1. | Anchor bolts . fitness for use tests
锁紧螺栓.使用试验的适合性 |
| 2. | Anchor bolts . part 1 : general , terminology , design safety rules for anchor bolts joints
锁紧螺栓.第1部分:锁紧螺栓接头的概述术语和设计安全性规则 |
| 3. | Anchor bolts . part 2 : tests for determining the characteristics properties and c ritical and minimum distances
锁紧螺栓.第2部分:特性和临界及最小距离的测定试验 |
| 4. | Fasteners - lockbolts , protruding head , with close tolerance and titanium alloy t - a6v shank and with collar in steel xc 10
紧固件.紧公差t - a v钛合金杆和xc钢环凸头锁紧螺栓 |
| 5. | Fasteners - lockbolts , 100 o countersunk head , with close tolerance and titanium alloy t - a6v shank and with collar in steel xc 10
紧固件.紧公差t - a v钛合金杆和xc钢环沉头锁紧螺栓 |
| 6. | Fasteners - lockbolts , protruding head , with close tolerance and titanium alloy t - a6v shank and with collar in aluminium alloy 2024
紧固件.紧公差t - a6v钛合金杆和2024铝合金环的凸头锁紧螺栓 |
| 7. | It can be installed in horizontal or vertical . sealing gasket must be put on the connected , then equably tight the bolt
本阀可水平安装或垂直安装，安装时两法兰连接中间必须加密封垫片，然后锁紧螺栓。 |
| 8. | Fasteners - lockbolts , 100 o countersunk head , with close tolerance and titanium alloy t - a6v shank and with collar in aluminium alloy 2024
紧固件.紧公差t - a6v钛合金杆和2024铝合金环的100沉头锁紧螺栓 |
| 9. | The valve can be installed in horizontal or vertical . add seal cushion between two flanges connection and screw down bolt
本阀可水平或垂直安装，安装时两法兰联接中间必须加密封垫片，然后均匀锁紧螺栓。 |
| 10. | Pay attention to the flow direction of medium marked on the body . add the sealed shim between the two flanges and then screw down the bolt
安装时请注意闸门本体上标明介质流向。两法兰连接时必需加密封垫片，然后均匀锁紧螺栓。 |
