English translation for "静压分布"

static-pressure distribution

Example Sentences:

	1.	Formula of static pressure distribution parameters for calculating the static pressure distribution in distributing headers of utility boiler 电站锅炉分配集箱静压分布参数的确定
	2.	Radial distribution of the static pressure at stator surface was measured in a rotor - stator disk cavity with centric inflow and two outflows 摘要中心进气具有两个出口的旋转盘系统中静盘表面沿半径方向的静压分布由实验方法获得。
	3.	The computational results given by s2df under the same conditions of experiments agree well with the experiments data not only the static pressure distribution but also the position of shock 计算的结果不论从叶表静压分布还是激波的位置，与实验的结果都相吻合。这表明了s2df程序气动计算的可靠性。
	4.	The influences of the inlet tube angle , backpressure and driving jet velocity on static pressure distribution in the gas - solid injector are calculated , and the effects of the inlet tube angle on particle bulk phase concentration and axial mean speed of particles in the gas - solid injector are analyzed firstly . the predicament caused by lack of measuring means on the particle velocity in experiments is solved 分析了收缩角、背压和气体喷嘴出口速度对气固喷射器内静压分布的影响，以及收缩角对气固喷射器内固体颗粒体积浓度场和颗粒平均速度的影响，解决了喷射器内固体颗粒速度试验测试手段缺乏的困境。
	5.	The experimental results show that the distribution of the radial static pressure behind the model cascade can be controlled by changing the diameter , number and distribution of the holes at different radius of the full circled backboard with the holes properly ， and the experiments variable enthalpy drop in the model cascade can be realized by using out - circled backboard or in - circled backboard which are set on the different distances from the trailing edge of the model cascade 实验结果表明，适当选择全环钻孔挡板不同半径处的钻孔率、钻孔直径与分布，可调节静叶后径向静压分布，采用外环或内环挡板，并将其分别置于静叶的近、中、远下游，可实现静叶栅的变焓降实验。
	6.	A reasonable position of driving nozzle helps to achieve the maximum material flow that also depends on other parameters such as backpressure , properties of conveyed material and driving gas . it is observed that , an increase of convergent section angle is harmful to the pneumatic conveying system , and also influences on the mass flow rate of conveyed material , the distribution of static pressures in injector and the pressure drops of conveying pipe . in addition , within a reasonable scope of air mass rate , increasing the driving jet velocity is more advantageous than enlarging the dimension of driving nozzle 试验研究发现，气体喷嘴位置对气固喷射器的输送能力影响最大，气体喷嘴存在某一最佳位置，而这一最佳位置与背压、输送物料特性和输送风特性相关联；气固喷射器的收缩角对其输送能力、内部静压分布和输送管阻力特性均有适量影响，收缩角增大对整个输送系统均不利；在适当的输送风范围内，提高气体喷嘴出口速度比扩大气体喷嘴尺寸更为有利，但气体喷嘴出口速度过高会增加气固喷射器和输送管内的能量损耗，给输送带来不利的影响；系统背压与气固喷射器的气体喷嘴出口速度的选取有关。
	7.	With the favor of these techniques , the static pressure distribution along the length and the velocity profile at the mini - channel exit were obtained . with the data of more than 500 flow states based on 13 kinds of mini straight rectangular channels that their heights were 0 . 5mm and 1 . 0mm , the effects of characteristic scale , surface roughness and the aspect ratio of rectangular on the characteristics of flow resistance of mini straight channels were studied 采用在沿程测量气流静压分布、在出口测量速度分布的方法，对高度0 . 5mm和1 . 0mm的13个微小直矩形通道的500多个状态流场进行了测量，研究了特征尺度、表面粗糙度、横截面宽高比等因素对微小等直通道流动阻力特性的影响。

Similar Words：

"静压导轨" English translation, "静压调节" English translation, "静压调节器" English translation, "静压读数" English translation, "静压法润滑" English translation, "静压缝口" English translation, "静压浮动磁头" English translation, "静压高差" English translation, "静压管" English translation, "静压管读数" English translation