| 1. | Mullitization of cyanite at high sintering temperature
高温烧结条件下蓝晶石的莫来石化 |
| 2. | Diffuser disc is produced from aluminum oxide and ceramic bonded together with high sintering temperature
性能特点： 1 .曝气盘采用氧化铝磨料和陶瓷结合剂高温烧结而成。 |
| 3. | Made of shaping polytetrafluorethylene resin by moulding in ordinary temperature then through high heat sintering
将聚四氟乙烯树脂在常温下用模压法成型后再经高温烧结制成。 |
| 4. | Made of shaping polytetrafluoethylene resin by moulding in ordinary lemperature then through high heat sintering
将聚四氟乙烯烧树脂在常温下用模压法成型后再经高温烧结制成。 |
| 5. | It ' s made of bronze or iron powder , mold pressed in high pressure ， sintered in high temperature and soaked in oil by vacuum
该产品是以铜粉或铁粉为原料，经模具压制、高温烧结、真空漫油后加工而成。 |
| 6. | Silicon carbide board : it is combined with high purity silicon carbide and ultra fines . shaped by vibration , maded by high sintering
碳化硅棚板：是以高纯碳化硅与超细粉结合，经振动成型，高温烧结而成。 |
| 7. | Made of shaping polytetrafluoethylene resin into blank by moulding in ordinary temperature , through high heat sintering , then ratary cut
用聚四氟乙烯烧树脂在常温下用模压法制成坯料，经高温烧结后旋切而成。 |
| 8. | Made of shaping polytetrafluoethylene resin added with a certain volume of extrusion assistant by extrusion than through high heat sintering
用聚四氟乙烯树脂加入一定量的助挤剂，采用糊膏挤出法成型后，再经高温烧结制成。 |
| 9. | Made of pressing polytetrafluoethylene resin into various simple shapes of seal in ordinary temperature then through high heat sintering and special treatments
用聚四氟乙烯树脂在常温下压制各种简单形状的密封件，再经高温烧结后经特殊方法处理制成。 |
| 10. | The high vacuum encapsulation of field emission display was realized with low - melting - glass encapsulation technology and high - temperature sintering process
摘要通过采用低熔点玻璃封接技术和高温烧结工艺，实现了稳定可靠的场致发射平板显示器高真空封装。 |
