| 1. | To be positioned and handled by hatch cover gantry crane
用舱口龙门吊来吊放它们。 |
| 2. | 2 gantry cranes of lifting weight 20 tons
起重量20吨的大型龙门吊2台。 |
| 3. | Interpretations : rules for construction of overhead and gantry cranes
说明:高架结构和龙门吊的规则 |
| 4. | Integrated innovation technology applied in waigaoqiao container terminals construction
龙门吊联网测重系统在集装箱码头的应用 |
| 5. | A new technique is put forward that high - low brace gantry crane wide double guiding girder method to construct bridge
本文提出了高低支腿龙门吊宽幅双导梁法这种新的桥梁工程施工方法。 |
| 6. | Code of practice for the planning , design , installation and use of permanently installed access equipment - travelling ladders and gantries
永久性安装的入口设备的规划设计安装和使用的实施规程.移动梯和龙门吊 |
| 7. | The truck crane ( gantry crane , tower crane , mobile slewing crane , bridge crane , crawler crane ) can lift a weight of 15 tons
这台汽车起重机（龙门吊、塔式吊、悬臂汽车吊、桥式吊、履带式起重机）能吊起15吨的重物。 |
| 8. | Through a real project - - - - - - " b " bid section of shijiazhuang south bridge . it is proved that high - low brace gantry crane wide double guiding girder method is a good and new technique of bridge construction
经过实际工程(石家庄南环大桥b标段)的施工实践验证，证明高低支腿龙门吊宽幅双导梁法是一种优良的桥梁工程施工新技术。 |
| 9. | For the design of mechanical systems and structures in a rubber tired gantry crane ( rtg ) , the mechanical designer has to design the most useful safe and practical way to improve the equipment and its operation , to reach best performance and use ability of the rtg
为轮胎式龙门吊的机械系统和结构提供设计，机械设计员必须设计最安全并且实用的方法以改善设备和其运行，达到轮胎式龙门吊最佳的性能。 |
| 10. | In this paper , on the basis of reviewing the traditional handling technology in container terminal , the handling technology of existing automatic container terminal is introduced : automated ohbc crane 、 agv - rmg 、 drmg - crmg relay
摘要在回顾集装箱码头的传统装卸工艺的基础上，介绍了现有集装箱自动化码头的装卸工艺：行架式自动化场桥与轨道式龙门吊配合；自动搬运车( agv )与轨道式龙门吊配合；高型轨道吊( drmg )和矮型轨道吊( crmg )接力式。 |
