| 1. | Decarburized steel sheets and strip for porcelain enamelling
涂搪瓷用脱碳钢板和钢带 |
| 2. | Methods of measuring decarburized depth for steel
钢件脱碳层深度的测量方法 |
| 3. | Permissible depth of flaw and decarburized layer
裂纹之容许深度及脱碳层 |
| 4. | Diameter tolerance ovality and average decarburized layer depth
偏圆度及脱碳层的平均深度 |
| 5. | Depth of decarburized zone
脱碳深度 |
| 6. | The decarburized layer also varies in depth and produces an inconsistent softer region compared to the region with full carbon
与之类似，脱碳面下部分淬火程度不如非脱碳面下部。 |
| 7. | Rapid heating rate and no decarburized zone due to heat treatment during austenization , the staying time between 850 to 1000 is only 5 to 10 second , thus no decarburized zone can be formed
在加热奥氏体化过程中，在850 - 1000温度范围内的停留时间只有5 - 10秒钟，因此，不会有热处理脱碳层。 |
