| 1. | Morphology and impact property of poly phenylene oxide polyamide ethylene - 1 - octene copolymer blends
原液粘度特性及纺丝工艺性的研究 |
| 2. | The new development and the application of metallocene ethylene / octene copolymer were reviewed with 20 references
摘要综述了茂金属乙烯辛烯共聚物作为弹性体材料的最新应用进展。 |
| 3. | Materials and articles in contact with foodstuffs - plastics substances subject to limitation - determination of 1 - octene and tetrahydrofuran in food simulants
与食品接触的材料和物品.受限制的塑料物质.食品模拟物中1 -辛烯和四氢呋喃的测定 |
| 4. | Materials and articles in contact with foodstuffs - plastics substances subject to limitation - part 26 : determination of 1 - octene and tetrahydrofuran in food simulants ; german version cen ts 13130 - 26 : 2005
接触食料的材料和物品.可塑性物质允许极限.第26部分 |
| 5. | The development and the application of metallocene ethylene / octene copolymer were reviewed with 21 references . as a result , these refer - ences were provided for the use and investigation of this new material
摘要概述了茂金属乙烯辛烯共聚物在菜丙烯、聚乙烯、聚酯、聚酰胺、苯乙烯基树脂等中的应用进展。 |
| 6. | The theological and crystallization behaviors of pp / eoc blends showed that increasing octene content in eoc elastomer resulted in a decrease of eoc fluidity , an increase of the adhesive fracture energy with pp ( that is compatibility with pp ) and of hindering pp crystallization
研究了pp eoc体系流变和结晶行为，发现随辛烯含量的增加， eoc流动性变差，与pp的界面粘结能增大，即相容性提高，对pp结晶的阻碍作用增强。 |
| 7. | Ethylene / octene copolymer sythesized by metallocene catalyst was a new kind of thermoplastic elastomer , which was molded as elastomer material by plastic common molding process such as injection , extrusion and blowing and also by rubber process such as chemical crosslinking by peroxide
采用茂金属催化剂合成的乙烯辛烯共聚物是一种新型热塑性弹性体，可用注射、挤出、吹塑等常用加工方法成型，又可用过氧化物进行化学交联，用橡胶加工方法制成弹性体材料。 |
| 8. | Preparation of polymer composites is one of the important methods to realize high performance of polymer materials . in this paper , a newly developed ethylene - octene copolymer ( eoc ) , catalyzed by metallocene catalysts , was used as an impact modifier for pp instead of traditional modifier ( epdm ) . the relationship between the structure and properties of polypropylene composites toughened and reinforced by eoc and cacos respectively or together was studied systematically
聚合物复合材料的制备是实现高性能聚合物材料的重要途径之一，本论文采用茂金属催化剂合成的新型聚烯烃弹性体乙烯-辛烯共聚物( eoc )代替传统的三元乙丙橡胶，对eoc和caco _ 3两种增韧剂分别和协同增韧增强聚丙烯复合材料体系的形态结构与性能的关系进行了系统的研究，围绕高性能、应用探索和理论研究三个方面作了较为深入的探索和分析，获取了很多有价值的信息，为高性能聚丙烯复合材料的开发和应用作了理论铺垫，主要结果如下： 1 |
