| 1. | Is the scsi bus to be booted from , this is
是启动的scsi总线， |
| 2. | Anything on scsi bus 0 can be shortened to 1 , 0 , leaving off the first 0
Scsi总线0上的设备都可以缩写为1 , 0 ，即省去头一个0 。 |
| 3. | Never place a tape drive on the same scsi bus as disks or a cd - rom drive
永远不要将磁带驱动器与磁盘或cd - rom驱动器放置在同一个scsi总线上。 |
| 4. | When using mscs , one node must be in control of the shared scsi bus prior to the other node coming online
使用mscs时，在其他节点在线之前，一个节点必须受共享scsi总线的控制。 |
| 5. | If your hardware uses a 53c9x - based scsi bus , then you may need to include the kernel parameter
如果您的硬件中包括基于53c9x的scsi总线，那么您需要包括下面的内核参数mac53c9x 1 , 0 |
| 6. | If you have a scsi bus , make sure you understand and follow the manufacturer ' s instructions for termination of the scsi bus
如果有scsi总线，请务必了解并遵循制造商的指导终止scsi总线。 |
| 7. | The first three numbers for each item refer to scsi bus , device id , and lun logical unit number , respectively
每一项的前三个数字分别指scsi总线、设备标识和lun （逻辑单元号， logical unit number ） 。 |
| 8. | Drives whose native transfer rate exceeds 50 percent of the scsi bus speed must be on a dedicated scsi bus to avoid loss in performance
本机传输速率超过scsi总线速度的50 %的驱动器必须在专用scsi总线上。 |
| 9. | Thankfully , there is a patch available for 2 . 4 kernels that causes the scsi bus to be scanned on startup see
令人感到高兴的是，对于导致scsi总线在启动时被扫描的2 . 4内核有可用的修补程序（有关更多详细信息，请参阅 |
| 10. | The maximum blocksize is 64 kb . many high - speed tape drives perform better if they have a dedicated scsi bus for each tape drive used
许多高速磁带驱动器如果对每个所使用的磁带驱动器有专用scsi总线，将运行得更好。 |
