| 1. | The convergence of cubic spline interpolation
三次样条插值的收敛性 |
| 2. | The application of cubic splines interpolation in the project fitting
三次样条插值在工程拟合中的应用 |
| 3. | It proves the validity of the spline interpolation on the base of experiments . 2
本文通过实验结果证明了采用三次样条插值的有效性。 |
| 4. | Cubic spline interpolant in power exponent form was introduced , and its existence under the first boundary condition was proved
摘要本文给出了三次样条插值函数的指数形式；在第一类边界条件下，证明了其存在性。 |
| 5. | At first , the constraints of a hip trajectory and an ankle trajectory are formulated , and the hip trajectory and the ankle trajectory are generated by 3rd order spline interpolation
在fm - 1的步态规划问题上，首先基于三次样条插值规划机器人的髋关节和踝关节轨迹。 |
| 6. | A new nn is presented and put into modeling work for the test . the empirical test indicates this kind of nn can perform excellent than traditional modeling methods such as linear interpolation , cubic spline interpolation
把这种网络用在智能金免疫层析试条定量测试系统数学模型的建立中，将其结果与传统插值法如线性插值、三次样条插值法的建模结果相比，效果较好。 |
| 7. | Through the simulation comparison between the pchip and the spline interpolation , it can be shown that the pchip has some advantages , such as no overshoots and less oscillation , which the spline interpolation does n ' t have when a signal is not smooth
通过pchip与三次样条插值的仿真对比,可以表明pchip具有更多的优势,如没有过冲现象和较小的振荡,这是三次样条插值在信号不是光滑时所不具有的。 |
| 8. | For eliminating contradiction between real - time and accuracy , we bring forward separately limit of error and reversal interpolation method . in the end , for decreasing calculation quantity , we resort to tri - spline interpolation in the articulation space
对于规划中精确性和实时性的矛盾，提出了以误差极限法和反向插值法来解决的方法，最后，为了减少规划过程中计算量，在关节空间进行三次样条插值。 |
| 9. | At the same time , in order to improve the distinguish ability to electricity layer . on the basis of assuring physical meaning of the conductance and the parameter , use thrice spline insert number function to deal with the fieldwork data , realize the differential imaging
同时，为了提高对电性层位的分辨能力，在明确电导及其导数曲线物理含义的基础之上，采用三次样条插值函数对实测数据进行重构，实现了电导参数的微分成像。 |
| 10. | Based on the test data , and by using the distillerys grain drying curve and drying - rate curve , this paper analysed the distillerys grain drying process , and demonstrated the characteristics of the drying and the change of drying - rate of the distillerys grain in heat - air penetrating bed
根据试验所测数据，利用三次样条插值函数拟合酒精糟干燥曲线和干燥速度曲线，深入分析酒精糟的干燥过程，得出酒精糟在热风穿床干燥方式下的干燥特点和干燥速度的变化规律。 |
