| 1. | Test method for fiber volume content
碳纤维增强塑料纤维体积含量试验方法 |
| 2. | Test method for fiber volume content of carbon fiber reinforced plastics
碳纤维增强塑料纤维体积含量试验方法 |
| 3. | Content by volume
单位体积含量 |
| 4. | Determination of fiber volume fractions in woven fabric composites laminates by image analysis
机织物复合材料纤维体积含量计算机图像测定 |
| 5. | Then the ralationship of the braiding parameters were deduced , and the fibre volume content was calculated
建立了单胞模型，推导出各参数之间的关系，计算了纤维体积含量。 |
| 6. | The filament winding angle when the fiber volume fraction of hoop orientation was equal to that of axial orientation was calculated
最后计算了轴向取向和环向取向纤维体积含量相等时缠绕角的值。 |
| 7. | High volume fraction sip - al composites were fabricated by al - alloy melt infiltration into si particles porous preforms without external pressure successfully
采用无压浸渗工艺成功制备出si体积含量为61 ? 81的高含量si al复合材料。 |
| 8. | In addition , the fiber volume fractions of composites have great impact on the quasi - static mechanical property and play a decisive role in the fatigue behavior
材料中纤维的体积含量不仅对其静态力学性能影响很大，对弯曲疲劳性能同样起到决定性作用。 |
| 9. | 4 . the conductivity of the composites was not only depended on the content of al2o3 particles in the material but also depended on the spaces of dendrites . 5
西安理工大学硕士学位论文4 . cu一a12o :复合材料的电导率大小不仅与a1203的体积含量有关，而且与材料组织中枝晶间距有关。 |
| 10. | Creep specimens ( different braiding structure , surface braiding angle , fibre volume content and under different loads ) were tested , which is the basis of studying their creep behaviors
并对不同编织结构、不同编织角、不同纤维体积含量、不同应力水平的三维编织复合材料试样进行了蠕变行为测试实验。 |
