Chinese translation for "体积成形"
|
- bulk forming
solid forming
Related Translations:
体积共振: bulk resonancevolume resonance 体积积分: space integralvolume integralvolume integration 孔隙体积: pore volumeporvpvvoid contentvoid volumevoids volumevolume of voids 体积比重: bulk densityspecific mass gravity
- Example Sentences:
| 1. | The actuality and development of precision bulk forming technique
精密体积成形技术的现状及其发展 | | 2. | Two variant semi - analytical generalized hybrid mixed crack finite element procedure for computational fracture mechanics in multi - layered domains
金属体积成形过程有限元模拟中六面体网格重划技术的研究 | | 3. | And the friction model is coupled to a finite element code named msc . superform so that the finite element code can consider the influence of velocity , temperature , normal stress and strain on the boundary conditions
采用提出的摩擦模型,对体积成形商业软件msc . superform进行了二次开发,使msc . superform对体积成形过程的分析具备考虑速度、温度、单位压力和变形程度等边界条件的影响。 | | 4. | A thermal rigid - visco - plastic constitutive relation accompanied by dynamic recrystallization is implanted into deform3d based on the unix and windows system by means of the user routines in order to add the function of predicting microstructure evolution during hot forging process to deform3d
在unix和windows平台上，对现有的体积成形商业软件deform3d进行了二次开发，利用deform3d的用户子程序功能，插入了包括动态再结晶过程的热粘塑性本构模型。 | | 5. | Tribology is an important factor that affects accuracy of finite element analyses . tribological specialties and major influencing factors of bulk metal forming is discussed in the present research . a friction model of bulk metal forming including the influence of temperature , normal pressure and strain on the tool - workpiece interface is developed on the basis of friction model developed by chen and kobayashi
本文对金属体积成形摩擦的特点和主要影响因素进行了分析,在反正切摩擦模型的基础上建立了基于成形温度、单位压力和变形程度等多因素变化的体积成形过程摩擦模型,可以充分地考虑体积成形中速度、温度、单位压力和变形程度对界面的影响。 | | 6. | Finite element method is widely used to simulate bulk metal forming processes in recent years . though finite element method is maturing in the simulation of metal forming processes , it has been a difficulty to deal with frictional conditions at the tool - workpiece interface . the frictional condition is usually simplified according to reality
近年来采用有限元技术对金属体积成形过程进行数值模拟得到了广泛的应用,但在用有限元模拟金属体积成形过程时,工件与模具摩擦边界条件的处理,一直被认为是一个难点,常常是通过一系列简化来处理,常用的方法有常摩擦模型和反正切摩擦模型。 |
- Similar Words：
- "体积测量法" Chinese translation, "体积产量" Chinese translation, "体积长度平均径" Chinese translation, "体积成本" Chinese translation, "体积成像" Chinese translation, "体积弛豫" Chinese translation, "体积储量" Chinese translation, "体积传热系数" Chinese translation, "体积船" Chinese translation, "体积磁化率" Chinese translation
|
|
|
