| 1. | Verification of serviceability limit states
正常使用极限状态验证10 |
| 2. | 1 you can use limit breaks more often when your hp is low
（当hp低的时候将有更多的机会可以使用极限技。 ） |
| 3. | Serviceability limit state
正常使用极限状态 |
| 4. | 6 the higher the speed stat , the better your chances of using a limit break
（速度越高，角色将有更大的机会使用极限技。 ） |
| 5. | Aircraft and aerospace . iso m thread . limiting profiles and iso tolerances for manufacturers
航空和航天. iso m螺纹.制造商使用极限牙形和iso公差 |
| 6. | Test result suggests , in the serviceability limit states , displacement is littleer , the plane stiffness infinite assumption may be established
实验结果表明，在正常使用极限状态时，位移较小，同一楼层平面内刚度无限大的假定可以成立。 |
| 7. | This resonance usually exceeds serviceability limit state and ultimate limit state ; endanger hydropower station ' s economic operation , even safe operation
这种共振往往超出厂房结构的正常使用极限状态和承载能力极限状态，威胁水电站的经济运行乃至安全运行。 |
| 8. | Those include the load carrying capacity of the specimens in the limit state , the cracking load of the specimens , the crack width of the specimens and the deflection of the specimens
论文从四个方面进行研究：轻骨料混凝土板的正截面承载力，抗裂度，正常使用极限状态下的裂缝宽度和挠度计算。 |
| 9. | According to the empirica1 design methqds , we can safe1y say that the method proposed can satisfy the 1imit state of load bearing capacity as we11 as that of the serviceabi1ity l imit state
根据钢筋混凝土杆系结构设计经验，可以认为该法同时满足了结构承载力极限状态和正常使用极限状态的要求。 |
| 10. | Concentrating on the questions and developmental directions of engineering structure reliability , the applicability of building steel structures that is studied relatively less is analyzed and studied
围绕工程结构可靠性发展中的存在问题及其发展方向，对研究相对较少的建筑钢结构适用性（正常使用极限状态）方面进行了相应的分析和研究。 |
