| 1. | Front washer reservoir
前风挡洗涤器储液罐 |
| 2. | Analysis of seismic response of liquid - storage elevated tank involving fluid sloshing and the uplift of tank bottom
考虑液体晃动和罐底提离储液罐的研究 |
| 3. | The slide bearing type system is specialized for applications with load beams and shear beams such as hoppers , tanks and mixer weighing
滑动轴承式系统是专门应用于测压梁和剪切梁的，比如料斗储液罐和搅拌机称重。 |
| 4. | Devantol solo p is put undiluted into the storage container of the spraying table . the pre - spotting table must have an efficient ventilation
Devantol solo p不加稀释加入到去渍台的储液罐中，请保证去渍台的通风良好。 |
| 5. | The numerical results show that the elephant foot bulging is in fact buckling failure which is caused by the overcritical compressive stress rather than intensity failure
分析表明：立式储液罐罐壁“象足”变形主要是由罐壁纵向压应力超过临界应力而产生的局部屈曲破坏，并非强度破坏。 |
| 6. | Comparing with small tank , the sloshing in large tank includes not only fundamental mode but also higher modes and its fundamental period is much larger than that of small tank
从与小体积罐的比较可以看出，大型储液罐的液面晃动不只是以基本振型为主，前几阶振型对液面晃动的贡献也比较显著，并且液面晃动的基本周期比小体积罐的大很多。 |
| 7. | The elephant foot bulging deformation of rigid walls of liquid - storage tanks under horizontal and vertical seismic ground motions is analyzed by using the finite element model involving fluid sloshing and tank bottom uplift with ansys
摘要基于ansys软件建立了考虑液体晃动和罐底提离立式储液罐有限元模型，分别进行了水平地震和竖向地震作用下罐壁“象足”变形分析。 |
