| 1. | Combine harvester tire loading and inflation pressures
联合收割机轮胎荷载和充气压力 |
| 2. | Tyre inflation pressure warning tell - tale
轮胎充气压力警报灯 |
| 3. | Experimental investigation of high velocity impacts on gas filled pressure vessels
充气压力容器高速撞击实验研究 |
| 4. | Charge pressure indicator
充气压力指示器 |
| 5. | Specification for tyres and wheels - tyres - off - the - road tyres - specification for narrow and wide base tyre loads and inflation pressures
轮胎和车轮规范.轮胎.越野轮胎.窄式轮胎和宽式轮胎载荷和充气压力规范 |
| 6. | With the filling nitrogen of 0 . 9 mpa , the maximal pressure ratio reaches 1 . 21 and the operation frequency is 25 hz , which is a rather good result in this field
以氮气为工质，在充气压力为0 . 9mpa的条件下，该热声发动机最大压比达1 . 21 ，工作频率为25hz ，这是当前国际上处于前列的实验结果。 |
| 7. | Transportable gas containers - specification for seamless aluminium alloy gas containers of water capacity 0 . 5 l up to 15 l and up to 300 bar charged pressure at 15 c for special portable application
可运输的气瓶.特殊便携的在15时最高达300巴充气压力的水容量为0 . 5l - 15l的无缝铝合金气瓶规范 |
| 8. | Being used the before - mentioned method , fold models of a column tube was established . by simulating analyses , effects of inflation velocity on the deployment process of different structures were investigated
本文还分别从理论和模拟两个角度对展开后,作为支撑结构的充气管进行了模态分析,考察了不同充气压力对充气支撑管的固有频率的影响规律。 |
| 9. | A computer - aided acquisition system was successfully developed by using graphic programming language labview . the accuracy and reliability of the acquired data was considerably improved . the onset temperature of the system was comparably low
实验结果表明，该系统具有起振温度低的突出优点，即使充气压力为1 . 5mpa ，加热温度达到237时就能起振。 |
| 10. | A hysteretic loop is also found in this system and its influencing factors are analyzed to discuss the condition of its occurrence , which is expected to help further understanding the mechanism of thermoacoustic oscillation
针对不同的加热功率和充气压力，系统地研究了起消振过程中的温度、压力变化特性，着重分析了滞后回路形成的过程和影响热声系统滞后回路的因素，指出滞后回路存在的条件，对深入理解热声系统的起消振行为具有参考意义。 |
