Chinese translation for "光吸收系数"

coefficient of light absorption (k)

Example Sentences:

	1.	Colourless optical glass test methods - coefficient of optical absorption 光吸收系数测试方法
	2.	Measuring method for coefficient of optical absorption of optical crystals 光学晶体光吸收系数测量方法
	3.	Testing method of light scattering and absorption coefficient for paper and pulps 纸和纸浆的光散射和光吸收系数测定法
	4.	Coefficient of light absorption 光吸收系数
	5.	The results indicate that with increasing the thickness of fes2 thin films , the electrical conductivity , the carrier concentration and the absorption coefficient decrease 结果表明，随着薄膜厚度的增加， fes2的电阻率升高，载流子浓度下降，在高吸收区fes2薄膜的光吸收系数也呈下降趋势。
	6.	When tg . is too low , the film would grown too fast to well - proportioned or take in ion pb which could increase the absorption coefficient . it was found that tg of film ybilg was 10 lower than tg of film ybig 温度过高时薄膜质量差，不易生长或容易脱落；温度过低，则不但会促进pb离子进入薄膜而增大薄膜光吸收系数，而且容易因为生长速度过大而导致薄膜的不均匀性甚至开裂。
	7.	Fe layers of different thickness have been converted to fes2 thin films by thermal sulfidation . the influence of the thickness on the crystal structure , electrical resistivity , carrier concentration , absorption coefficient and energy gap of fes2 thin films have been investigated 采用硫化不同厚度的fe膜制备了不同厚度的fes2薄膜的方法，研究了不同厚度fes2薄膜的晶体结构、电阻率、载流子浓度、光吸收系数以及禁带宽度。
	8.	And it has a high absorption coefficient ( > 10 ~ 4cm ~ ( - 1 ) ) and a high conversion efficiency of ~ 25 % . in addition , elements sn and s are abundant and non - toxic in nature , which has good compatibility to environment . thus , it can be used as an absorbing layer material in the solar photovoltaic cells 其具有很大的光吸收系数( > 10 ~ 4cm ~ ( - 1 ) ) ,且在理论上其能量转换效率最高可达到25 % ,其组成元素在地球上储存含量丰富,有很好的环境兼容性,因而非常适合于作为太阳能电池中的光吸收层。
	9.	Test and analysis some properties such as crystal structure , superficial resistivity , light transparence , absorption coefficient etc . obtain the best technical process and parameters with analyzing how film thickness , deposition rate , boat temperature , substrate temperature affect the films " structure and optical and electrical properties 并对薄膜的晶相结构、电阻率、光透过率、光吸收系数等电学和光学性质进行了测试和分析。通过分析薄膜厚度、沉积速率、舟温、基温等工艺参数对薄膜结构及光电特性的影响，得出了制备复合光吸收层的最佳工艺参数以及工艺条件。
	10.	Fes _ 2 ( pyrite ) has been considered as a valuable semiconductor for solar energy conversion and other photoelectrochemical applications since it consists of nontoxic and abundant elements . because of the band gap of about 0 . 95ev and the very high light absorption coefficient ( < 700nm 时 ， > 5 10 ~ 5cm ~ - 1 ) , it might be suitable for sensitization solar cells and in the form of ultrathin films Fes _ 2 ( pyrite )是一种具有合适禁带宽度( e _ g 0 . 95ev )和较高光吸收系数( < 700nm时， > 5 10 ~ 5cm ~ - 1 )的半导体材料，其组元元素储量十分丰富、无毒，而且在制备太阳能电池时可以以薄膜形式使用，成本较低，与已有半导体材料相比，是一种较有研究价值的太阳能电池材料。

Similar Words：

"光吸收光谱法" Chinese translation, "光吸收矩阵" Chinese translation, "光吸收谱线" Chinese translation, "光吸收散射浊度计" Chinese translation, "光吸收式浊度计" Chinese translation, "光吸收系数测试方法" Chinese translation, "光吸收限" Chinese translation, "光吸收线" Chinese translation, "光铣" Chinese translation, "光铣法" Chinese translation