| 1. | An ocad optical design software package for automatic drawing
一个可完全自动绘图的光学设计软件- ocad光学设计软件包 |
| 2. | If it is true , then i think optics in china will soon on top of the world
现在的光院同学在学校里就掌握了光学设计软件了吗？ |
| 3. | Research of aberration characterization using two different optical design softwares
用2种光学设计软件对像差特性进行的研究 |
| 4. | The optical modeling and simulation of micro optical switch using in laser ignition are made by zemax
摘要利用综合光学设计软件zemax对激光点火用微光开关进行了光学建模和耦合特性的仿真分析。 |
| 5. | A software controlled the polishing is programmed , and integrating the cad / cam technology , a procedure joined the optical design software to optical manufacture machines is advanced
以此建立修正抛光的模型，编制控制研抛的接口软件，引入cad cam一体化制造技术，提出从光学设计软件到光学制造设备的工序联接。 |
| 6. | Antireflection coatings is designed by using the advanced software for optics design , in the process of design the combination of the design software and the classical idea of design to film coefficient is adopted
借助先进的光学设计软件tfc3 . 5分析设计了减反射膜，设计过程中采用设计软件与经典的膜系设计思想相结合的方法。 |
| 7. | Secondly , the initial structure parameters of the f - theta lens are obtained with p - w method . and then a few of optimal f - theta lenses with different working area and required optical performances are gained with zemax optical design software under practical constrained conditions
结合实际使用时的具体要求,如工作面为平面、工作面上照度须均匀分布等,利用zemax光学设计软件,建立合理的品质函数,优化设计得到多种不同工作面积的f - theta镜头。 |
| 8. | How to improve the three primary colors led light source cavity , polarizing beam splitter system of civil lcos hmd is discussed in this paper . in addition , a new eyepiece optical system with wide fov ( field of view ) 、 big exit pupil 、 long eye relief is also designed by an optical design program named zemax . the result is very successful
本文对民用lcos头盔微显示器的led三基色光源及其腔体、偏振分光系统进行了改进,借助zemax光学设计软件辅助设计出了大视场、大出瞳直径、长出瞳距离的目镜放大光学系统,获得了十分理想的效果。 |
| 9. | Secondly , basic design project of wide - fov optical system with optical gain is proposed after the optical gain of typical wide - fov optical unit with optical gain has been analyzed and the infrared optical material has been selected . then the structure of optical system is optimized and analyzed with optical design software
然后通过对典型宽视场有增益光学单元的光学增益分析,选取合适的红外光学材料,给出了宽视场有增益光学系统初始设计方案,并用光学设计软件进行结构优化和分析评价。 |
| 10. | The direction of my thesis is creating a new type coherent coupling diode laser array with high optical quality by bidirectional coupling with optical fiber array . thus the welding quality and welding speed can be improved . in my research experiments , the cylinder fiber lens is used as a coupling lens system firstly
本课题首先使用柱透镜耦合方案作为双向耦合的先行方案,使用光学设计软件模拟半导体激光器的光斑在经过光纤柱透镜后的整形变化,指导了使用光纤柱透镜进行大功率半导体激光器列阵与光纤密排阵列耦合的方法。 |
