Chinese translation for "共模电压范围"

cmv
common-mode voltage range

Example Sentences:

	1.	3 . a good result is gotten under the star - hspice simulation . the dc gain is 90 db , the offset voltage is 40 u v while driving 10k , the unity - gain frequency is 10mhz with phase margin 67 , the slew rate is 10w us while driving 10pf 用star - hspice仿真软件对电路仿真，在1 . 5v电源电压、直流10k负载、交流10pf负载的情况下，整个共模电压范围内跨导基本保持恒定，只有18的变化，直流增益90db ，单位增益带宽10mhz ，相位裕度80度，压摆率10v s 。
	2.	The thesis has done the widespread investigation and study to the domestic and foreign ’ s technologies of analogy low voltage and low power , and analyzes the principles of work , merts and shortcomings of these technologies , based on the absorption of these technologies , it designs a 1 . 5v low power rail - to - rail cmos operational amplifier . when designing input stage , in order to enable the input common mode voltage range to achieve rail - to - rail , it does not use the traditional differential input pair , but use the nmos tube and the pmos tube parallel supplementary differential input pair to the structure , and uses the proportional current mirror technology to realize the constant transconductance of input stage . in the middle gain stage design , the current mirror load does not use the traditional standard cascode structure , but uses the low voltage , wide - swing casecode structure which is suitable to work in low voltage . when designing output stage , in order to enhance the efficiency , it uses the push - pull common source stage amplifier as the output stage , the output voltage swing basically reached rail - to - rail . the thesis changes the design of the traditional normal source based on the operational amplifier , uses the differential amplifier with current mirror load to design a normal current source . the normal current source provides the stable bias current and the bias voltage to the operational amplifier , so the stability of operational amplifier is guaranteed . the thesis uses the miller compensate technology with a adjusting zero resistance to compensate the operational amplifier 本论文对国内外的模拟低电压低功耗技术做了广泛的调查研究,分析了这些技术的工作原理和优缺点,在吸收这些技术成果基础上设计了一个1 . 5v低功耗轨至轨cmos运算放大器。在设计输入级时,为了使输入共模电压范围达到轨至轨,不是采用传统的差动输入结构,而是采用了nmos管和pmos管并联的互补差动输入对结构,并采用成比例的电流镜技术实现了输入级跨导的恒定;在中间增益级设计中,电流镜负载并不是采用传统的标准共源共栅结构,而是采用了适合在低压工作的低压宽摆幅共源共栅结构;在输出级设计时,为了提高效率,采用了推挽共源级放大器作为输出级,输出电压摆幅基本上达到了轨至轨;本论文改变传统基准源基于运放的设计,采用了带电流镜负载的差分放大器设计了一个基准电流源,给运放提供稳定的偏置电流和偏置电压,保证了运放的稳定性;并采用了带调零电阻的密勒补偿技术对运放进行频率补偿。

Similar Words：

"共模被拒绝率" Chinese translation, "共模错误" Chinese translation, "共模电感器" Chinese translation, "共模电流" Chinese translation, "共模电压" Chinese translation, "共模电压增益" Chinese translation, "共模电阻" Chinese translation, "共模端" Chinese translation, "共模扼流程" Chinese translation, "共模扼流圈" Chinese translation