| 1. | Cold ends can be different lengths
冷端部可以制成不同的长度。 |
| 2. | High accuracy cold end compensation circuit
高精度冷端补偿电路 |
| 3. | The most common is vertical with the element being hung from the cold ends
最常用的是立式的，从冷端部安装。 |
| 4. | Cathode cold end effect
阳极冷端效应 |
| 5. | Cold junction compensation
冷端补偿 |
| 6. | Cold terminal difference
冷端温差 |
| 7. | The first several inches of the cold ends are metallized with aluminum to provide a low - resistance contact surface
硅碳棒的冷端部的两端的接触面喷了少量铝来降低阻值。 |
| 8. | Electrical connections are made using flat aluminum braids , held in compression to the cold end circumference by stainless steel spring clamps
电路依靠喷铝部连接起来，用不锈钢弹簧夹子固定在冷端部的周围。 |
| 9. | This , for example , would be applicable for furnaces with arched roofs that require longer cold ends through the roof and shorter through the floor
比如，在熔炉应用中可以制成弓形，穿过炉顶的冷端部比较长，穿过炉底的冷端部比较短。 |
| 10. | Streaming from the hot end to the cold end of the regenerator was found which would waste much useful heating energy . modified structure of the jet pump could control this sort of streaming efficiently
实验中还观察到了直流现象，气体从回热器热端向冷端运动，造成大量的能量浪费，通过改进喷射泵结构可以有效抑制直流。 |
