| 1. | Effect of temperature of coagulation bath on structure and properties of lyocell fibers from bamboo pulp
凝固浴温度对有机溶剂法再生竹纤维素纤维结构与性能的影响 |
| 2. | The dense top layer as well as porous supporting layer can be made by duel - bath coagulation method simultaneously
双凝固浴成膜方法可同时获得较厚的致密表面层和疏松多孔的支撑层。 |
| 3. | Effects of coagulation bath temperature on the structure and performance of polyethersulfone hollow - fiber membranes by dry wet process
凝固浴温度对相转化聚醚砜中空纤维膜结构与性能的影响 |
| 4. | If coagulant bath temperature was too high , flat membranes would have presented themselves with all kinds of defects
凝固浴温度对填充聚合物平板膜有很大影响。温度过高时，所得平板膜易出现多种缺陷。 |
| 5. | 4 . the effect of the temperature and concentration of the second coagulation bath on the structure and properties of pes membranes are studied
4 .研究了第二凝固浴温度和浓度对聚醚矾膜的结构与性能的影响。 |
| 6. | The studies on stability of pu - sio2 , pes - sio2 suspensions and influence coagulant bath temperature on flat membrane were carried out
研究了无机粒子填充聚合物悬浮铸膜液的稳定性及凝固浴温度对平板膜成形的影响。 |
| 7. | 3 . the effects of the component and the time in the first coagulation bath on the structure and " properties of pes membranes are studied
3 .研究了第一凝固浴的组分和第一凝固浴中的停留时间对膜表层结构与膜性能的影响。 |
| 8. | In the case of high nmmo concentration of coagulation bath , the pure water flux is higher while the rejection can be kept at a relative high value
而改变凝固浴中nmmo的浓度则可制得高通量、高截留率、高应用价值的分离膜。 |
| 9. | The membranes exhibit good hydrophilic performance and high water flux with highly loose and inter - connective microstructure , which is potential for the separation of protein
优化了制膜工艺条件，并对影响膜结构与性能的一些因素，如聚合物浓度、添加剂含量、铸膜液温度和凝固浴温度进行了研究。 |
| 10. | As the time in the first coagulation bath increases , the water flux decreases and the clearance rates of urea and creatintine both first increase , then decrease and increase a little at last
随着在第一凝固浴中停留的时间越长，膜的水通量越低，肌肝和尿素的去除率均是先升高后下降然后稍有上升的趋势。 |
