| 1. | The compressor-outlet pressure is nearly constant around the circumference .
压气机出口压力沿圆周方向接近于常数。 |
| 2. | Rules for the inspection of flangesof pressure vessels for export
出口压力容器法兰检验规程 |
| 3. | Start the pump and bring up to speed immediately while observing the discharge pressure
启动泵，立即提速，同时观察出口压力。 |
| 4. | After selecting valve size , locate inlet and outlet pressures on this chart
阀门通径选择后，在这个图表中找出进口和出口压力。 |
| 5. | Application of characters of discharge pressure fluctuation to monitor of centrifugal pump
出口压力波动特性在离心泵汽蚀监测中的应用 |
| 6. | Find the number on the pressure difference line and note the outlet pressure index number
找出压差线上的数字，并且注意出口压力指数。 |
| 7. | This is the lowest outlet pressure setting allowed without failing into the cavitation zone
这是不会落入空穴区的最低的出口压力设置。 |
| 8. | Calculate the pressure difference by subtracting the desired outlet pressure from the maximum inlet pressure
通过从最大进口压力减去所需要的出口压力来计算压差。 |
| 9. | Check pressure drop ( inlet - outlet ) to insure that desired outlet pressure is above the recommended lowest outlet setting to avoid cavitation conditions
止回压降（进口-出口）确保所需的出口压力处于推荐的最低出口设置点上，以避免空穴现象发生。 |
| 10. | The model can satisfactorily predict commercial operation results with regard to the edc conversion , vcm selectivity , pressure and temperature at the outlet of reactor coil
与工业数据比较后发现，炉管出口的转化率、选择性、出口压力和温度等数据与模型预测值一致，表明模型具有较高的可信度。 |
