| 1. | Axial hydraulic thrust
液力轴向推力 |
| 2. | The clutch rotor is fixed on the input shaft and the clutch armature is fixed on the output shaft
离合器的转子固定在入力轴，而离合器的电极板与刹车被固定在出力轴上。 |
| 3. | In general , the degree in mechanical drive shaft rotation into force after a stop and then output a one - axis
一般来说，分度传动机械在入力轴旋转一次后停止一下，然后出力轴分度一次。 |
| 4. | When swinging transmission machine operation , the force constant rotation axis to make efforts before and axial rotation move backward
当摇摆传动机械运行时，等速旋转入力轴使出力轴向前和向后旋动。 |
| 5. | Aerospace series . elements of electrical and optical connection . test methods . part 410 : insert retention in housing
航空航天系列.电气及光学连接元件.试验方法.第410部分:绝缘体在壳体内的保持力轴向 |
| 6. | Drivers kok ( cam degree angle ) : - axis rotation angle of hospitality require a degree movement . greater perspective , the more stable movement
驱动角（凸轮分度角） ：入力轴旋转角要求招待一次分度运动。角度越大，运动越平稳。 |
| 7. | Taper support rib usually two or three cam roller contacts , in order to edge into the axis of rotation to be sent to the uniform output shaft
锥度支撑肋通常与两个或三个凸轮滚子接触，以便入力轴的旋转可均匀地传送到出力轴。 |
| 8. | When rotating into force , in accordance with the cam roller set displacement curve effort rotating turret , while the ramps along the rib rolling
当入力轴旋转时，凸轮滚子按照设定的位移曲线旋动出力转塔，而同时又沿肋的斜面滚动。 |
| 9. | When swinging drive mechanical operation , such as the rotation speed of the force to make efforts axial shaft before and backward rotation and enable higher plane
当摇摆传动机械运作时，等速度的旋转入力轴使出力轴向前和向后旋转，并使平面升高。 |
| 10. | Rotating through means of supporting the eccentric shaft housings can be high - power output shaft axis and the distance between completely exclude sleek phenomenon
通过旋转支撑入力轴的偏心轴承座可高速入力轴和出力轴之间的距离，能完全排除不滑顺的现象。 |
